JVC GR-PD1, LYT1193-001A manual 54 EN, DV to DV dubbing, MPEG2 to MPEG2 dubbing

54 EN		DUBBING (cont.)
To use this camcorder as a recorder		NOTES:
Dubbing from other devices in MPEG2 format is		DV to DV dubbing
possible if the connected device is another same		● If a blank portion or disturbed image is played
model of this unit.		back on the player during dubbing, unusual
1	Perform step 1 to 4 of “To use this camcorder as a	images may be dubbed or the dubbing may stop.
2	player” ( pg. 53).	MPEG2 to MPEG2 dubbing
	Set “REC MODE” to “SP” or “LP”. ( pg. 33, 34)	● It is not possible to dub signals in MPEG2 format
3	Turn on the video unit’s power.	from devices other than another same model of
		this camcorder.
4	Insert the source cassette in the video unit.	● MPEG2 signals that are copy-guarded may not be
5 Insert the recording cassette in this camcorder.		recorded with this camcorder.
6	Press the Recording Start/Stop Button to engage	● When dubbing MPEG2 video to the camcorder,
		image may not appear on the LCD monitor or

the Record-Pause mode.			viewfinder. However, the recording is performed
● The “		” indication appears on the
	i.LINK IN		properly.
screen.

7Press the Recording Start/Stop Button to start recording.

●The indication rotates.

8Press the Recording Start/Stop Button again to engage the Record-Pause mode.

●The indication stops rotating.

9Repeat steps 7 – 8 for additional editing. Stop the video unit and camcorder.