16 EN, Loading a Cassette Unloading a Cassette

16 EN

Loading A Cassette

/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

Erase protection tab

Make sure the window side is facing out.

PUSH HERE	Cassette holder

Cassette holder cover

OPEN/EJECT Switch

1Loosen the grip strap.

2Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

●Do not touch internal components.

3Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

●Be sure to press only the section labelled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

●Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

●When the battery pack’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing.

4Close the cassette holder cover firmly until it

locks into place.

To protect valuable recordings…

Slide the erase protection tab on the back of the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Approximate recording time

Tape	Recording mode

	SP	LP
	SP	LP

30 min.	30 min.	45 min.

60 min.	60 min.	90 min.

80 min.	80 min.	120 min.

To switch the recording mode, refer to pages 33 and 34.

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

●Closing the cassette holder cover before the cassette holder recedes may cause damage to the camcorder.

●Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See “Recording From The Middle Of A Tape”

( pg. 21).

GR-PD1, LYT1193-001A specifications

The JVC LYT1193-001A, GR-PD1 is a compact and innovative camcorder that embodies the convergence of advanced technology and user-friendly design. Known for its robust build and high-quality video recording capabilities, this device has gained popularity among amateur filmmakers and casual videographers alike.

One of the main features of the GR-PD1 is its ability to record high-resolution video in various formats. With its progressive scan technology, it captures smooth and detailed footage that rivals more expensive models in the market. This camcorder supports various recording modes, allowing users to choose between standard, high-definition, or even specific frame rates to suit their filming needs.

The camcorder's optical zoom capability is another standout characteristic. Equipped with a high-quality lens, the GR-PD1 offers impressive zoom range while maintaining clarity and detail. This allows users to film subjects from a distance without compromising on image quality. The lens is complemented by a digital stabilizer that helps to reduce the effects of shake, providing steady shots even in challenging conditions.

An intuitive LCD touchscreen interface adds to the user-friendliness of the JVC LYT1193-001A. The screen allows for easy navigation through menu settings, making it simple to adjust various parameters on the fly. This is crucial for those who need to make quick changes while shooting, ensuring that they capture the perfect moment without technical delays.

In terms of connectivity, the GR-PD1 is designed to interface seamlessly with other devices. It includes USB and HDMI outputs, allowing for quick transfer of videos to computers or direct streaming to televisions. This versatility enables users to edit and share their content with ease, enhancing the overall experience of digital content creation.

Battery life is another essential aspect of the GR-PD1, and JVC has equipped this model with a long-lasting power source. This feature ensures that users can shoot for extended periods without worrying about frequent recharging, making it ideal for events, travels, and spontaneous filming opportunities.

Overall, the JVC LYT1193-001A, GR-PD1 is a remarkable camcorder that combines advanced technologies with ease of use, making it suitable for both novices and experienced videographers. Its blend of image quality, zoom capabilities, user interface, connectivity options, and battery life makes it a versatile choice for anyone looking to capture high-quality video.