JVC GR-PD1 manual 44 EN, Manual Iris Adjustment, Auto Focus, Manual Shutter Speed Adjustment

Page 44

44 EN

FEATURES FOR RECORDING (cont.)

Lock Button

Power Switch

S/A Button

MENU Wheel

Manual Shutter Speed Adjustment

Changing the shutter speed manually allows a fast- moving subject to be shot as if it is stationary, or to be intentionally blurred for vivid playback.

1Set the Power Switch to “M” while pressing down the Lock Button located on the Switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

3Press S/A.

The shutter speed level indicator appears.

4For the fast shutter speed, rotate the MENU Wheel toward R (fastest 1/1000 sec.).

For the slow shutter speed, rotate the MENU Wheel toward T (slowest 1/12 sec.).

To return to automatic shutter speed adjustment...

Press S/A twice. Or, set the Power Switch to “A”.

Manual Iris Adjustment

Adjusting the iris manually provides an image special effect by changing the range of focusing.

1Set the Power Switch to “M” while pressing down the Lock Button located on the Switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

3Press S/A twice.

The iris level indicator appears.

4To close the iris, rotate the MENU Wheel toward R (maximum F 22.0). To open the iris, rotate the MENU Wheel towards T (minimum F 1.8).

Closing the iris (increasing the value) enables focusing on both a subject and background.

Opening the iris (decreasing the value) allows appropriate brightness in poor lighting conditions, while the range of focusing will decrease.

To return to automatic iris adjustment...

Press S/A. Or, set the Power Switch to “A”.

Auto Focus

The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity.

Focus detection zone

However, correct focus may not be obtainable in the situations listed below (in these cases perform “Manual Focus”):

When two subjects overlap in the same scene.

When illumination is low.*

When the subject has no contrast (difference in brightness and darkness), such as a flat, one- colour wall, or a clear, blue sky.*

When a dark object is barely visible in the LCD monitor or the viewfinder.*

When the scene contains minute patterns or identical patterns that are regularly repeated.

When the scene is affected by sunbeams or light reflecting off the surface of a body of water.

When shooting a scene with a high-contrast background.

*The following low-contrast warnings appear blinking: , , and

NOTES:

If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean. ( pg. 79) When condensation occurs, wipe with a soft cloth or wait for it to dry naturally.

When shooting a subject close to the lens, zoom out first. ( pg. 20) If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when “TELE MACRO” is set to “ON”. ( pg. 35)

Image 44
Contents GR-PD1 It is recommended that you… Important for owners in the U.KDear Customer Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene… Remote Control Unit Cleaning CassetteDC Cord Memory Card 8 MBHow To Attach The Core Filter How To Attach The StrapProcedure below is an example of winding cable once Types of core filters Size Cable Times toHow To Detach/Attach The Lens Hood How To Attach The Lens CapTo detach To attachHow To Use The Audio Cable How To Attach The HandleContents Power Charging The Battery PackUsing The Battery Pack 10 ENUsing AC Power About BatteriesCause a fire or explosion For other notes,  pgGrip Adjustment While using the LCD monitorWhile using the viewfinder 12 ENViewfinder Adjustment  pg14 EN Operation ModePower-Linked Operation Rotate the Menu Wheel Date/Time SettingsBuilt-in Clock’s Rechargeable Lithium Battery Approximate recording time Tape Recording mode 16 ENLoading a Cassette Unloading a Cassette To protect valuable recordings…Loading a Memory Card /Unloading a Memory Card To protect valuable files available only for SD Memory Card…To prevent valuable recordings from data dropouts… 18 ENBasic Recording Recording Mode RES20 EN Tape Remaining TimeZooming Journalistic ShootingTime code cannot be reset When a blank portion is recorded on a tapeTime Code Recording From The Middle Of a TapeTo control the speaker volume… 22 ENNormal Playback Still PlaybackShuttle Search Slow-Motion PlaybackPlayback Zoom Blank SearchTo Connect a Conventional TV or VCR Component Video Connectors24 EN If using a VCR, go to step If not, go to stepFor S-video or video connection For component video connectionTo change the Image Size and/or Picture Quality,  pg 26 ENBasic Shooting D.S.C. Snapshot Available only with the remote control provided.  pg Auto Playback Of ImagesViewing File Information 28 ENIndex Playback Of Files Protecting Files To Remove ProtectionTo protect the currently displayed file Card30 EN Deleting FilesTo delete the currently displayed file Memory card To delete all files stored in the memory cardResetting The File Name To cancel selectionTo Print All Still Images One Print For Each Folder and File namesTo Reset The Number Of Prints 32 ENInitialising a Memory Card To Print By Selecting Still Images And Number Of PrintsFor D.S.C. Playback Menus For Video and D.S.C. Recording MenusFor Video Playback Menus 34 EN Camera MenuSelf-Timer Maximum telephoto settingManual Menu Optical Image Stabilisation36 EN System MenuDisplay Menu 38 EN DSC MenuPicture quality Image sizeVideo Menu 40 EN Self-Timer Set SELF-TIMER to on .  pgTo end Self-Timer recording, select OFF in step Press SnapshotMotor Drive Mode Press the Exposure Wheel in. Or, set the Power Switch to a42 EN Exposure ControlTo return to automatic iris Control Iris LockBacklight Compensation Manual Iris Adjustment Manual Shutter Speed AdjustmentTo return to automatic iris adjustment 44 ENManual Zooming To reset to Auto FocusManual Focus White Balance Adjustment Select Auto in . Or, set the Power Switch to a46 EN To return to automatic white balance…Manual White Balance Adjustment 48 EN Wipe Or Fader EffectsProgram AE SportsSpecial Effects To deactivate the selected effectTo cancel Navigation search midway 50 ENNavigation Function To make thumbnail images after video recording ManuallyBe corrupted if the battery becomes exhausted Mode, it will enter the playback pause modeSet the Playback Mode switch to Video During deletion. If the memory card becomes52 EN To use this camcorder as a playerTo use this camcorder as a recorder Date/timeSet this camcorder’s Power Switch to P Recorded in HI-RES or PS50 modeFormats, set i.LINK OUT to AUTO. In this Case, proceed to stepMPEG2 to MPEG2 dubbing 54 ENDV to DV dubbing If an image recorded on the tape using DV Dubbing Still Images Recorded OnCard is not loaded, the message Copying Failed is displayedInstalling The Batteries 56 ENBeam Effective Area indoor use Buttons And FunctionsPlayback Zoom DV only Slow-Motion Playback DV onlyFrame-By-Frame Playback DV only 58 EN Audio Dubbing DV onlyPlayback Special Effects DV only To hear the sound during Audio DubbingDuring Insert Editing, set the Recording Mode Switch to DV Insert Editing DV onlyVCR Code List VCR Brand Name 60 ENRandom Assemble Editing R.A.Edit DV only Set Remote/VCR CodeConnector… Pause connector but equipped with anEdit connector… Make Connections62 EN Select ScenesAutomatic Editing To VCR Engage the Stop modes for the camcorder and the VCRAdjustment Of VCR/Camcorder Timing 64 ENFor More Accurate Editing Diagnosing VCR/Camcorder TimingUsing USB cable Using i.LINK cableUsing USB cable Using i.LINK cable66 EN WebCamThis camcorder can be used as a WebCam via USB connection You can also use the camcorder for videoItems Power Symptom Possible Causes Corrective Action68 EN Video and D.S.C. RecordingVideo and D.S.C. Playback LCD monitor or Certain Wipe/Fader effectsViewfinder indications blink Certain modes of Program AE, OIS and other AE and OIS. pgPress Back Light Advanced features70 EN Is discharged Other problemsCamcorder When the LCD monitor’s Clean the viewfinder, please 72 ENOr Both Consult your nearest JVCAppears when no tape is loaded  pg Indications MeaningThan 1 hour until condensation disappears Compatible with this camcorder74 EN Meaning Link ConnectionSize that is not compatible with this camcorder Protected SD Memory Card loadedIndication remains, consult your nearest JVC dealer Your nearest JVC dealerGeneral Battery Precautions Battery Packs76 EN CassettesMemory Cards LCD MonitorMain Unit Do NOT…How To Handle a CD-ROM 78 ENAbout moisture condensation Serious malfunctioningCleaning The Camcorder After Use80 EN USB VTR82 EN Indicators ConnectorsControls Other Parts84 EN LCD Monitor/Viewfinder IndicationsDuring Video Recording Only During D.S.C. Recording OnlyDuring Video Playback 86 EN Wide Mode DV Wide Playback soundProgram AE Program AE Recording TimeGR-PD1 Software Installation How to handle a CD-ROMCPU System Requirements  For copying still image files to a PC For creating a DVD Video CPU For holding a video conference over the Internet HardwareSoftware MiscellaneousSoftware Installation Installation begins Input your information in all boxes, and then click NextClick Finish Serial numberOn the camcorder’s LCD monitor USB Mode appears ConnectionsUSB connection Connect the camcorder to the PC with a USB cableLink connection Driver Installation Hardware Update Wizard dialog box appearsDriver search dialog box appears Dialog box to select the manufacture and model appearsBrowse Click the next three items in the order belowClick Next Click Continue Anyway Viewing the Contents of a Memory Card To print a still image Copying Still Images to a PCStill Images Playback Disconnecting the USB Cable Select USB Mass Storage Device, and then click StopClick OK Camcorder turns offImporting MPEG-format Video Stream to a PC Make sure that the camcorder’s model name isDisplayed Click Import, and then click BrowseStart button Start playback using control buttonsYou can view playback on the camcorder’s LCD monitor Reinstalling the driver Reinstall the driver.  pgClick the Hardware tab, and then click Device Manager Click OK Disconnect the i.LINK cable, and connect it againEnglish Caution When Loading a Cassette Deutsch Achtung Beim Einlegen von Kassetten beachtenFrançais Attention Lors de linsertion dune cassette Nederlands LET OP Wanneer u een cassette plaatstNorsk OBS Ved innsetting av kassett Deksel for kassettholder EtikettsidenFedél 카세트 홀더

GR-PD1, LYT1193-001A specifications

The JVC LYT1193-001A, GR-PD1 is a compact and innovative camcorder that embodies the convergence of advanced technology and user-friendly design. Known for its robust build and high-quality video recording capabilities, this device has gained popularity among amateur filmmakers and casual videographers alike.

One of the main features of the GR-PD1 is its ability to record high-resolution video in various formats. With its progressive scan technology, it captures smooth and detailed footage that rivals more expensive models in the market. This camcorder supports various recording modes, allowing users to choose between standard, high-definition, or even specific frame rates to suit their filming needs.

The camcorder's optical zoom capability is another standout characteristic. Equipped with a high-quality lens, the GR-PD1 offers impressive zoom range while maintaining clarity and detail. This allows users to film subjects from a distance without compromising on image quality. The lens is complemented by a digital stabilizer that helps to reduce the effects of shake, providing steady shots even in challenging conditions.

An intuitive LCD touchscreen interface adds to the user-friendliness of the JVC LYT1193-001A. The screen allows for easy navigation through menu settings, making it simple to adjust various parameters on the fly. This is crucial for those who need to make quick changes while shooting, ensuring that they capture the perfect moment without technical delays.

In terms of connectivity, the GR-PD1 is designed to interface seamlessly with other devices. It includes USB and HDMI outputs, allowing for quick transfer of videos to computers or direct streaming to televisions. This versatility enables users to edit and share their content with ease, enhancing the overall experience of digital content creation.

Battery life is another essential aspect of the GR-PD1, and JVC has equipped this model with a long-lasting power source. This feature ensures that users can shoot for extended periods without worrying about frequent recharging, making it ideal for events, travels, and spontaneous filming opportunities.

Overall, the JVC LYT1193-001A, GR-PD1 is a remarkable camcorder that combines advanced technologies with ease of use, making it suitable for both novices and experienced videographers. Its blend of image quality, zoom capabilities, user interface, connectivity options, and battery life makes it a versatile choice for anyone looking to capture high-quality video.