JVC GR-PD1, LYT1193-001A manual 48 EN, Wipe Or Fader Effects, Program AE, Sports

Page 48
FEATURES FOR RECORDING (cont.)

48 EN

Wipe Or Fader Effects

Wipe/Fader effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next.

Wipe or Fader works when video recording is started or stopped.

Lock Button

Power Switch

P.AE Button

FADE/WIPE Button

MENU Wheel

EFFECT Button

There are 9 types of Fader/Wipe Effects for scene transition.

FADER–WHITE: Fade in or out with a white screen.

FADER–BLACK: Fade in or out with a black screen.

FADER–B.W: Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.

WIPE – CORNER: Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen.

WIPE – WINDOW: The scene starts in the centre of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the centre.

WIPE – SLIDE: Wipe in from right to left, or wipe out from left to right.

WIPE – DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.

WIPE – SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen.

WIPE – SHUTTER: Wipe in from the centre of a black screen toward the top and bottom, or wipe out from the top and bottom toward the centre leaving a black screen.

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

3Press FADE/WIPE. The WIPE/FADER screen appears.

4To activate the Fade-in or Wipe-in:

Rotate the MENU Wheel to select the desired effect and press it during Record-Standby mode.

The selected effect indicator appears.

To activate the Fade-out or Wipe-out:

Rotate the MENU Wheel to select the desired effect and press it during recording.

The selected effect indicator appears.

5Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect…

Select “OFF” in step 4. Or, set the Power Switch to “A”.

NOTES:

You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

Wipe Effects is not activated when the recording mode is set to “HI-RES”.

IMPORTANT:

Some Wipe/Fader Effects cannot be used with certain modes of Program AE or Special Effects. If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out.

Program AE

Program AE allows you to shoot images according to various situations.

SPORTS

(Variable Shutter Speed: 1/250 – 1/1000) This setting allows fast-moving images to be captured one frame at a time, for vivid, stable slow- motion playback. The faster the shutter speed, the darker the picture becomes. Use the shutter function under good lighting conditions.

SNOW: Compensates for subjects that may otherwise appear too dark when shooting in extremely bright surroundings such as in the snow.

SPOTLIGHT: Compensates for subjects that may otherwise appear too bright when shooting under extremely strong direct lighting such as spotlights.

NOTE:

“SPOTLIGHT” has the same effect as –3 with the exposure control. ( pg. 42)

Image 48
Contents GR-PD1 Important for owners in the U.K Dear CustomerIt is recommended that you… Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene… Remote Control Unit Cleaning CassetteDC Cord Memory Card 8 MBHow To Attach The Core Filter How To Attach The StrapProcedure below is an example of winding cable once Types of core filters Size Cable Times toHow To Detach/Attach The Lens Hood How To Attach The Lens CapTo detach To attachHow To Use The Audio Cable How To Attach The HandleContents Power Charging The Battery PackUsing The Battery Pack 10 ENUsing AC Power About BatteriesCause a fire or explosion For other notes,  pgGrip Adjustment While using the LCD monitorWhile using the viewfinder 12 ENViewfinder Adjustment  pgOperation Mode Power-Linked Operation14 EN Date/Time Settings Built-in Clock’s Rechargeable Lithium BatteryRotate the Menu Wheel Approximate recording time Tape Recording mode 16 ENLoading a Cassette Unloading a Cassette To protect valuable recordings…Loading a Memory Card /Unloading a Memory Card To protect valuable files available only for SD Memory Card…18 EN Basic RecordingTo prevent valuable recordings from data dropouts… Recording Mode RES20 EN Tape Remaining TimeZooming Journalistic ShootingTime code cannot be reset When a blank portion is recorded on a tapeTime Code Recording From The Middle Of a TapeTo control the speaker volume… 22 ENNormal Playback Still PlaybackShuttle Search Slow-Motion PlaybackPlayback Zoom Blank SearchComponent Video Connectors 24 ENTo Connect a Conventional TV or VCR If using a VCR, go to step If not, go to stepFor S-video or video connection For component video connection26 EN Basic Shooting D.S.C. SnapshotTo change the Image Size and/or Picture Quality,  pg Available only with the remote control provided.  pg Auto Playback Of Images28 EN Index Playback Of FilesViewing File Information Protecting Files To Remove ProtectionTo protect the currently displayed file Card30 EN Deleting FilesTo delete the currently displayed file Memory card To delete all files stored in the memory cardResetting The File Name To cancel selectionTo Print All Still Images One Print For Each Folder and File namesTo Reset The Number Of Prints 32 ENInitialising a Memory Card To Print By Selecting Still Images And Number Of PrintsFor Video and D.S.C. Recording Menus For Video Playback MenusFor D.S.C. Playback Menus 34 EN Camera MenuSelf-Timer Maximum telephoto settingManual Menu Optical Image Stabilisation36 EN System MenuDisplay Menu 38 EN DSC MenuPicture quality Image sizeVideo Menu 40 EN Self-Timer Set SELF-TIMER to on .  pgTo end Self-Timer recording, select OFF in step Press SnapshotMotor Drive Mode Press the Exposure Wheel in. Or, set the Power Switch to a42 EN Exposure ControlIris Lock Backlight CompensationTo return to automatic iris Control Manual Iris Adjustment Manual Shutter Speed AdjustmentTo return to automatic iris adjustment 44 ENTo reset to Auto Focus Manual FocusManual Zooming White Balance Adjustment Select Auto in . Or, set the Power Switch to a46 EN To return to automatic white balance…Manual White Balance Adjustment 48 EN Wipe Or Fader EffectsProgram AE SportsSpecial Effects To deactivate the selected effectTo cancel Navigation search midway 50 ENNavigation Function To make thumbnail images after video recording ManuallyBe corrupted if the battery becomes exhausted Mode, it will enter the playback pause modeSet the Playback Mode switch to Video During deletion. If the memory card becomes52 EN To use this camcorder as a playerTo use this camcorder as a recorder Date/timeSet this camcorder’s Power Switch to P Recorded in HI-RES or PS50 modeFormats, set i.LINK OUT to AUTO. In this Case, proceed to step54 EN DV to DV dubbingMPEG2 to MPEG2 dubbing If an image recorded on the tape using DV Dubbing Still Images Recorded OnCard is not loaded, the message Copying Failed is displayedInstalling The Batteries 56 ENBeam Effective Area indoor use Buttons And FunctionsSlow-Motion Playback DV only Frame-By-Frame Playback DV onlyPlayback Zoom DV only 58 EN Audio Dubbing DV onlyPlayback Special Effects DV only To hear the sound during Audio DubbingDuring Insert Editing, set the Recording Mode Switch to DV Insert Editing DV onlyVCR Code List VCR Brand Name 60 ENRandom Assemble Editing R.A.Edit DV only Set Remote/VCR CodeConnector… Pause connector but equipped with anEdit connector… Make Connections62 EN Select ScenesAutomatic Editing To VCR Engage the Stop modes for the camcorder and the VCRAdjustment Of VCR/Camcorder Timing 64 ENFor More Accurate Editing Diagnosing VCR/Camcorder TimingUsing USB cable Using i.LINK cableUsing USB cable Using i.LINK cable66 EN WebCamThis camcorder can be used as a WebCam via USB connection You can also use the camcorder for videoItems Power Symptom Possible Causes Corrective Action68 EN Video and D.S.C. RecordingVideo and D.S.C. Playback LCD monitor or Certain Wipe/Fader effectsViewfinder indications blink Certain modes of Program AE, OIS and other AE and OIS. pgAdvanced features 70 ENPress Back Light Other problems Camcorder When the LCD monitor’sIs discharged Clean the viewfinder, please 72 ENOr Both Consult your nearest JVCAppears when no tape is loaded  pg Indications MeaningThan 1 hour until condensation disappears Compatible with this camcorder74 EN Meaning Link ConnectionSize that is not compatible with this camcorder Protected SD Memory Card loadedIndication remains, consult your nearest JVC dealer Your nearest JVC dealerGeneral Battery Precautions Battery Packs76 EN CassettesMemory Cards LCD MonitorMain Unit Do NOT…How To Handle a CD-ROM 78 ENAbout moisture condensation Serious malfunctioningCleaning The Camcorder After Use80 EN USB VTR82 EN Indicators ConnectorsControls Other Parts84 EN LCD Monitor/Viewfinder IndicationsDuring Video Recording Only During D.S.C. Recording OnlyDuring Video Playback 86 EN Wide Mode DV Wide Playback soundProgram AE Program AE Recording TimeGR-PD1 Software Installation How to handle a CD-ROMCPU System Requirements  For copying still image files to a PC For creating a DVD Video CPU For holding a video conference over the Internet HardwareSoftware MiscellaneousSoftware Installation Installation begins Input your information in all boxes, and then click NextClick Finish Serial numberOn the camcorder’s LCD monitor USB Mode appears ConnectionsUSB connection Connect the camcorder to the PC with a USB cableLink connection Driver Installation Hardware Update Wizard dialog box appearsDriver search dialog box appears Dialog box to select the manufacture and model appearsClick the next three items in the order below Click Next Click Continue AnywayBrowse Viewing the Contents of a Memory Card Copying Still Images to a PC Still Images PlaybackTo print a still image Disconnecting the USB Cable Select USB Mass Storage Device, and then click StopClick OK Camcorder turns offImporting MPEG-format Video Stream to a PC Make sure that the camcorder’s model name isDisplayed Click Import, and then click BrowseStart playback using control buttons You can view playback on the camcorder’s LCD monitorStart button Reinstalling the driver Reinstall the driver.  pgClick the Hardware tab, and then click Device Manager Click OK Disconnect the i.LINK cable, and connect it againEnglish Caution When Loading a Cassette Deutsch Achtung Beim Einlegen von Kassetten beachtenFrançais Attention Lors de linsertion dune cassette Nederlands LET OP Wanneer u een cassette plaatstNorsk OBS Ved innsetting av kassett Deksel for kassettholder EtikettsidenFedél 카세트 홀더

GR-PD1, LYT1193-001A specifications

The JVC LYT1193-001A, GR-PD1 is a compact and innovative camcorder that embodies the convergence of advanced technology and user-friendly design. Known for its robust build and high-quality video recording capabilities, this device has gained popularity among amateur filmmakers and casual videographers alike.

One of the main features of the GR-PD1 is its ability to record high-resolution video in various formats. With its progressive scan technology, it captures smooth and detailed footage that rivals more expensive models in the market. This camcorder supports various recording modes, allowing users to choose between standard, high-definition, or even specific frame rates to suit their filming needs.

The camcorder's optical zoom capability is another standout characteristic. Equipped with a high-quality lens, the GR-PD1 offers impressive zoom range while maintaining clarity and detail. This allows users to film subjects from a distance without compromising on image quality. The lens is complemented by a digital stabilizer that helps to reduce the effects of shake, providing steady shots even in challenging conditions.

An intuitive LCD touchscreen interface adds to the user-friendliness of the JVC LYT1193-001A. The screen allows for easy navigation through menu settings, making it simple to adjust various parameters on the fly. This is crucial for those who need to make quick changes while shooting, ensuring that they capture the perfect moment without technical delays.

In terms of connectivity, the GR-PD1 is designed to interface seamlessly with other devices. It includes USB and HDMI outputs, allowing for quick transfer of videos to computers or direct streaming to televisions. This versatility enables users to edit and share their content with ease, enhancing the overall experience of digital content creation.

Battery life is another essential aspect of the GR-PD1, and JVC has equipped this model with a long-lasting power source. This feature ensures that users can shoot for extended periods without worrying about frequent recharging, making it ideal for events, travels, and spontaneous filming opportunities.

Overall, the JVC LYT1193-001A, GR-PD1 is a remarkable camcorder that combines advanced technologies with ease of use, making it suitable for both novices and experienced videographers. Its blend of image quality, zoom capabilities, user interface, connectivity options, and battery life makes it a versatile choice for anyone looking to capture high-quality video.