JVC GR-SXM86ED specifications EN11, Regular VHS VCR

Page 11

EN11

NOTES about S-VHS and S-VHS ET

JVC EHG (Extra High Grade) tapes are recommended for superior results.

Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.

— It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test record beforehand to make sure whether better results can be obtained.

If the S-VHS ET mode or recording format is switched during recording, the playback picture will be blurred at the switching point.

It is recommended that tapes recorded on this camcorder be played back on this camcorder.

Tapes recorded in S-VHS or S-VHS ET mode can be played back not only on this camcorder but also on a Super VHS VCR.

— Tapes recorded in S-VHS ET mode cannot be played back on some VCRs, including some JVC VCRs.

Tapes recorded in S-VHS or S-VHS ET mode cannot be played back correctly on a normal VHS VCR.

S-VHS ET does not work with S-VHS tapes.

To avoid on-screen noise, do not perform Still Playback or Shuttle Search repeatedly.

If the picture contains a lot of jitter or noise, use a cleaning cassette.

Compatibility Between S-VHS And VHS

RecordingPlayback

Blank tape

Camcorder

Recorded tape

Cassette adapter

S-VHS-C

S-VHS

cassette

recordings

S-VHS ET recordings

S-VHS VCR

•The recorded format (S-VHS or VHS) is automatically detected when playback begins.

 

 

Regular VHS VCR

VHS-C

VHS

•S-VHS recorded tapes cannot be

cassette

recordings

 

 

viewed on regular VHS VCRs.

Image 11
Contents Instructions It is recommended that you Dear CustomerModels equipped with LCD monitor only EN3Automatic Demonstration Power Cord Remote Control Unit RM-V716U Battery PackEN5 How To Attach The Core FilterSlide Battery Release and pull out the battery pack Charging the Battery PackPower To Detach The Battery PackApproximate recording time unit min Using the Battery PackUsing AC Power EN7Tripod Mounting Grip AdjustmentRotate Menu to select Date/Time SettingsPower lamp Comes on10 EN Recording Format SettingRegular VHS VCR EN11Tape Length Setting Recording Mode SettingEN13 Loading/Unloading a CassetteRotate Bright until the bright level 14 ENShooting While Watching To Stop RecordingJournalistic Shooting models equipped with LCD monitor only EN15SELF-RECORDINGmodels equipped with LCD monitor only Zoom Out 16 ENZoom Press the Recording Start/Stop Button to start recording EN17If you press during Record-Standby 18 ENSnapshot Night-ScopeFades in/out to a black screen Fade/Wipe EffectsEN19 Program AE With Special Effects 20 ENEN21 Digital EffectsIf you select Jlip ID no Using Menus For Detailed AdjustmentSystem Menu Menu Screen ExplanationsCamera Menu 24 EN Instant Titles Date/Time InsertSet REC Time and 2 of Animation above Time-LapseEN27 Set the Power Switch to Press MENU. The Menu Screen appearsExposure Control Manual Focus Focusing28 EN Auto FocusPress Menu again to close the Menu Screen White Balance AdjustmentManual White Balance Operation EN2930 EN Load a tape pg Set the Power Switch toEN31 To cancel the effect, select OFF in stepUse the provided A/V cable Use the provided A/V cable and S-Video cableEN33 Power supply instead of the battery pack pgBasic Connections Tape DubbingSlide the latch to open the adapter compartment 34 ENCassette Adapter CoverFunctions Buttons EN35EN Using the Remote Control Unit To End Zoom EN37Playback Zoom Press Play to find the scene of interestInsert Editing 38 ENFor Insert Editing and Audio Dubbing Audio DubbingEN39 You are now ready to try Random Assemble Editing 40 ENSET REMOTE/VCR Code Press Shift for this oneConnect the editing cable to the Remote Pause terminal Connect the editing cable to the R.A.EDIT connectorEN41 Make ConnectionsSelect Scenes 42 ENEditing cable and the A/V cable OUT 9 the scene you want to edit and press PauseDate/Time SettingsCharging time varies according to the ambient temperature 44 ENTime Base TBC indicator turns green grey with a camcorder equippedRecording TBCAnimation or Time-Lapse is not No power is suppliedRecording cannot be performed Recording does not startLens CAP warning indicator An error number i.e. E03 appearsThat Date/Time setting is carried out Lens CAP warning indicator may blink when3 4 5 y u # $ % 48ENEN49 Indications During Recording Night-Scope Indicator ................... pgVHS/S-VHS ET Recording Indicator 50 ENIndications Function Tape Counter Tape Running Indicator PlaybackIndications During Playback EN51To avoid hazard To prevent damage and prolong service life52 EN Use only the following batteriesEN53 About moisture condensation To prolong service lifeCleaning The Camcorder To prevent damage to the LCD monitor, do notGeneral ConnectorsOptional Accessories GR-FX36EDGR-FXM66EDGR-SX56EDGR-SXM76EDGR-SXM85EDGR-SXM86ED