40
EN
USING
THE
REMOTE
CONTROL
UNIT
(cont.)
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
VCR (Recording deck)automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR
Before operation, make sure the batteries are installed in the remote control (☞ pg. 36).
SHIFT | MBR SET |
3 | 4 | |
1 | 2 | |
5 | ||
6 | ||
| ||
| 7 8 9 ` |
SET REMOTE/VCR CODE
1 Turn off the power to the VCR and point the remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button (A) and then (B).
•The code is automatically set once you release MBR SET, and the VCR’s power comes on.
2 Make sure the VCR’s power is on. Then, while holding SHIFT, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you do not need to
VCR CODE LIST
VCR BRAND | BUTTONS |
NAME | (A) (B) |
AKAI | 6 2 |
| 6 4 |
| 7 7 |
BLAUPUNKT | 1 3 |
FERGUSON | 9 7 |
| 9 8 |
| 3 2 |
GRUNDIG | 1 4 |
| 3 4 |
HITACHI | 6 6 |
| 6 3 |
JVC A | 9 1 |
B | 9 6 |
C | 9 3 |
MITSUBISHI | 6 7 |
| 6 8 |
NEC | 3 7 |
| 3 8 |
PANASONIC | 1 3 |
| 1 7 |
| 1 1 |
| 9 4 |
| 1 8 |
VCR BRAND | BUTTONS | |
NAME | (A) (B) | |
PHILIPS | 1 9 | |
| 9 5 | |
| 1 1 | |
| 9 4 | |
| 9 1 | |
| 9 6 | |
| 1 2 | |
| 3 3 | |
| 7 2 | |
SANYO | 3 | 6 |
| 3 | 5 |
SELECO, | 9 1 | |
REX | 9 6 | |
SHARP | 1 5 | |
| 1 ` | |
SONY | 6 5 | |
| 6 ` | |
| 3 9 | |
| 3 1 | |
THOMSON, | 9 1 | |
TELEFUNKEN, | 9 6 | |
SABA, | 9 7 | |
NORDMENDE | 3 2 | |
TOSHIBA | 6 9 | |
| 6 1 | |
press SHIFT for this one).
You are now ready to try Random Assemble Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.
NOTES:
●If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.
●Some brands of VCR do not come on automati- cally. In this case, turn the power on manually and try step 2.
●If the remote control is not able to control the VCR, use the controls on the VCR.
●When the remote control’s battery runs out, the VCR brand you have set will be erased.
In that case, replace the old battery with a new one and reset the VCR brand.