EN37
Remote sensor | Playback Zoom |
Zoom Buttons
STOP
PLAY
To magnify the recorded image up to 10X at any time during playback.
NOTES:
●Use the remote control unit to perform this procedure.
●Make sure that the TBC mode is activated (☞ pg. 31).
1 Press PLAY to find the scene of interest.
2 Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder’s remote sensor. Pressing T zooms in.
To End Zoom . . .
.... press and hold W until magnification returns to
normal. Or, press STOP and then press PLAY.
NOTES:
● Zoom can also be used during still playback.
● Due to digital image processing, the quality of the image may suffer.
● After zooming in on a still video image, when normal playback is started, the