JVC GR-SXM86ED specifications Grip Adjustment, Tripod Mounting

8EN						GETTING STARTED (cont.)
					Grip Adjustment
			Power Zoom		1 Separate the Velcro strip.
			Lever
			Recording			Pass your right hand through the loop and grasp the
			Start/Stop
			Button		2 grip.
						Adjust so that your thumb and fingers can easily
					3 operate the Recording Start/Stop Button and Power
						Zoom Lever. Refasten the Velcro strip.
	3				Viewfinder Adjustment
	2
	180°				1 Set the Power Switch to “		” or “	”.
		1			2 Adjust the viewfinder manually for best viewability.
			M		3	Turn the Dioptre Adjustment Control until the
			A
			FF			indications in the viewfinder are clearly focused.
			O
			Y
			A
			L
			P
		Set to “		” or
		“	”.
PAUSE					Shoulder Strap Attachment
						Following the illustration, thread the strap through the
					1 eyelet 1, then fold it back and thread it through the
						buckle 2. Repeat the procedure to attach the other
	2					end of the strap to the other eyelet 3, making sure
		1				the strap is not twisted.
					2 Adjust as shown in the illustration 4.
4	3
					Tripod Mounting

1 Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend its legs fully to Stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.