JVC GR-SXM86ED 34 EN, Cassette Adapter, Cover, Slide the latch to open the adapter compartment

Page 34

34EN

PLAYBACKUsingTheCassetteAdapter

Cassette Adapter

Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any S-VHS/VHS video cassette recorder. The cassette adapter is battery powered and automatically performs tape loading and unloading.

1 Slide the battery cover up to remove it, install one “AA (R6)” size battery as shown, then reattach the

			cover.

	VCR		Slide the latch to open the adapter compartment
	VCR	2 door, then insert the cassette and close the compart-
		2 door, then insert the cassette and close the compart-
			ment door.

Compartment door

Sliding latch

Compact video cassette

Reels

Recording safety hole

3 Load the cassette adapter into the VCR and play the tape back as you would any other.

4 Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then, insert your finger in the hole on the underside of the adapter as shown in the illustration at left, and push up and remove the cassette.

NOTES:

●During tape loading and unloading, do not touch the reels for safety and tape protection.

●Tapes recorded in S-VHS or S-VHS ET mode cannot be played back on a regular VHS VCR. Playback is possible with a VCR equipped with the S-VHS function (GR-SXM86ED/SXM85ED/SXM76ED/SX56ED only).

●During special-effect playback (slow motion, still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

●To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Image 34

Contents Instructions Dear Customer It is recommended that youEN3 Models equipped with LCD monitor onlyPower Cord Remote Control Unit RM-V716U Battery Pack Automatic DemonstrationHow To Attach The Core Filter EN5To Detach The Battery Pack Charging the Battery PackPower Slide Battery Release and pull out the battery packEN7 Using the Battery PackUsing AC Power Approximate recording time unit minGrip Adjustment Tripod MountingComes on Date/Time SettingsPower lamp Rotate Menu to selectRecording Format Setting 10 ENEN11 Regular VHS VCRRecording Mode Setting Tape Length SettingLoading/Unloading a Cassette EN13To Stop Recording 14 ENShooting While Watching Rotate Bright until the bright levelSELF-RECORDINGmodels equipped with LCD monitor only EN15Journalistic Shooting models equipped with LCD monitor only Zoom 16 ENZoom Out EN17 Press the Recording Start/Stop Button to start recordingNight-Scope 18 ENSnapshot If you press during Record-StandbyEN19 Fade/Wipe EffectsFades in/out to a black screen 20 EN Program AE With Special EffectsDigital Effects EN21Using Menus For Detailed Adjustment If you select Jlip ID noCamera Menu Menu Screen ExplanationsSystem Menu 24 EN Date/Time Insert Instant TitlesTime-Lapse Set REC Time and 2 of Animation aboveExposure Control Set the Power Switch to Press MENU. The Menu Screen appearsEN27 Auto Focus Focusing28 EN Manual FocusEN29 White Balance AdjustmentManual White Balance Operation Press Menu again to close the Menu ScreenLoad a tape pg Set the Power Switch to 30 ENTo cancel the effect, select OFF in step EN31Use the provided A/V cable and S-Video cable Use the provided A/V cableTape Dubbing Power supply instead of the battery pack pgBasic Connections EN33Cover 34 ENCassette Adapter Slide the latch to open the adapter compartmentEN35 Functions ButtonsEN Using the Remote Control Unit Press Play to find the scene of interest EN37Playback Zoom To End Zoom38 EN Insert EditingEN39 Audio DubbingFor Insert Editing and Audio Dubbing Press Shift for this one 40 ENSET REMOTE/VCR Code You are now ready to try Random Assemble EditingMake Connections Connect the editing cable to the R.A.EDIT connectorEN41 Connect the editing cable to the Remote Pause terminal42 EN Select ScenesOUT 9 the scene you want to edit and press Pause Editing cable and the A/V cable44 EN SettingsCharging time varies according to the ambient temperature Date/TimeTBC TBC indicator turns green grey with a camcorder equippedRecording Time BaseRecording does not start No power is suppliedRecording cannot be performed Animation or Time-Lapse is notLens CAP warning indicator may blink when An error number i.e. E03 appearsThat Date/Time setting is carried out Lens CAP warning indicator48EN 3 4 5 y u # $ %EN49 50 EN Night-Scope Indicator ................... pgVHS/S-VHS ET Recording Indicator Indications During RecordingEN51 Tape Counter Tape Running Indicator PlaybackIndications During Playback Indications FunctionUse only the following batteries To prevent damage and prolong service life52 EN To avoid hazardEN53 To prevent damage to the LCD monitor, do not To prolong service lifeCleaning The Camcorder About moisture condensationOptional Accessories ConnectorsGeneral GR-FX36EDGR-FXM66EDGR-SX56EDGR-SXM76EDGR-SXM85EDGR-SXM86ED