JVC GR-SXM86ED specifications 18 EN, Snapshot, Night-Scope, If you press during Record-Standby

Page 18

18EN

SNAPSHOT Button

RECORDINGAdvancedFeatures

Snapshot

Power Switch

NOTES:

●After SNAPSHOT is pressed, there is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, which is recorded together with the image.

●Snapshot is available during playback as well. However, the shutter sound is not heard.

Use your camcorder like a regular camera and take a snapshot, or several of them in succession.

1 Set the Power Switch to “” or “ ”.

2 Press SNAPSHOT.

If you press during Record-Standby . . .

.... a still image will be recorded for approx.

6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... a still image will be recorded for approx.

6 seconds, then the normal recording resumes.

NIGHT-SCOPE Button

Power Switch

NOTES:

●During Night-Scope, the following functions or settings cannot be activated:

•“Picture Stabiliser” (☞ pg. 16), “Program AE With Special Effects” (☞ pg. 20) and “Digital Effects” (☞ pg. 21).

•“S.LX” in CAMERA MENU (☞ pg. 23).

●Night-Scope does not work when LIGHT

OFF/AUTO/ON is set to “AUTO” or “ON” (☞ pg. 17).

●During Night-Scope, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended.

Night-Scope

Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.

1 Set the Power Switch to “” or “ ”.

2 Press NIGHT-SCOPErepeatedly until the desired mode’s name and indication appear.

They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The mode is activated.

3 To cancel the effect, press NIGHT-SCOPErepeatedly until “OFF” appears. “OFF” is displayed for approx. 2 seconds.

A NIGHT AUTO

The shutter speed is automatically adjusted (maximum 1/5 sec.).

1 NIGHT 10X*

The shutter speed is set to 1/5th of a second to provide 10 times the sensitivity.

2 NIGHT 50X*

The shutter speed is set to 1 second to provide 50 times the sensitivity.

*Appears when the Power Switch is set to “ ”.

Image 18

Contents Instructions Dear Customer It is recommended that youEN3 Models equipped with LCD monitor onlyPower Cord Remote Control Unit RM-V716U Battery Pack Automatic DemonstrationHow To Attach The Core Filter EN5To Detach The Battery Pack Charging the Battery PackPower Slide Battery Release and pull out the battery packEN7 Using the Battery PackUsing AC Power Approximate recording time unit minGrip Adjustment Tripod MountingComes on Date/Time SettingsPower lamp Rotate Menu to selectRecording Format Setting 10 ENEN11 Regular VHS VCRRecording Mode Setting Tape Length SettingLoading/Unloading a Cassette EN13To Stop Recording 14 ENShooting While Watching Rotate Bright until the bright level EN15 SELF-RECORDINGmodels equipped with LCD monitor only Journalistic Shooting models equipped with LCD monitor only 16 EN ZoomZoom Out EN17 Press the Recording Start/Stop Button to start recordingNight-Scope 18 ENSnapshot If you press during Record-StandbyFade/Wipe Effects EN19Fades in/out to a black screen 20 EN Program AE With Special EffectsDigital Effects EN21Using Menus For Detailed Adjustment If you select Jlip ID noMenu Screen Explanations Camera MenuSystem Menu 24 EN Date/Time Insert Instant TitlesTime-Lapse Set REC Time and 2 of Animation aboveSet the Power Switch to Press MENU. The Menu Screen appears Exposure ControlEN27 Auto Focus Focusing28 EN Manual FocusEN29 White Balance AdjustmentManual White Balance Operation Press Menu again to close the Menu ScreenLoad a tape pg Set the Power Switch to 30 ENTo cancel the effect, select OFF in step EN31Use the provided A/V cable and S-Video cable Use the provided A/V cableTape Dubbing Power supply instead of the battery pack pgBasic Connections EN33Cover 34 ENCassette Adapter Slide the latch to open the adapter compartmentEN35 Functions ButtonsEN Using the Remote Control Unit Press Play to find the scene of interest EN37Playback Zoom To End Zoom38 EN Insert EditingAudio Dubbing EN39For Insert Editing and Audio Dubbing Press Shift for this one 40 ENSET REMOTE/VCR Code You are now ready to try Random Assemble EditingMake Connections Connect the editing cable to the R.A.EDIT connectorEN41 Connect the editing cable to the Remote Pause terminal42 EN Select ScenesOUT 9 the scene you want to edit and press Pause Editing cable and the A/V cable44 EN SettingsCharging time varies according to the ambient temperature Date/TimeTBC TBC indicator turns green grey with a camcorder equippedRecording Time BaseRecording does not start No power is suppliedRecording cannot be performed Animation or Time-Lapse is notLens CAP warning indicator may blink when An error number i.e. E03 appearsThat Date/Time setting is carried out Lens CAP warning indicator48EN 3 4 5 y u # $ %EN49 50 EN Night-Scope Indicator ................... pgVHS/S-VHS ET Recording Indicator Indications During RecordingEN51 Tape Counter Tape Running Indicator PlaybackIndications During Playback Indications FunctionUse only the following batteries To prevent damage and prolong service life52 EN To avoid hazardEN53 To prevent damage to the LCD monitor, do not To prolong service lifeCleaning The Camcorder About moisture condensationConnectors Optional AccessoriesGeneral GR-FX36EDGR-FXM66EDGR-SX56EDGR-SXM76EDGR-SXM85EDGR-SXM86ED