JVC GY-HD100, GY- HD101 Auto White Balance Indication Camera mode only, Menu Setting Screen

Page 30

CONTROLS, INDICATORS AND CONNECTORS

Indications on the LCD Monitor and in the Viewfinder (Cont’d)

Auto White Balance Indication (Camera mode only)

The AUTO WHITE indication and the result of the operation are displayed during the auto white balance adjustment oper- ation.

X See “White Balance Adjustment” on page 43.

Menu Setting Screen

Screen used for making various settings.

The Menu Setting Screen appears when the STATUS button is pressed for 1 second or more.

X See “Setting Menu Screens” on page 60.

TOP MENU screen (Camera mode)

Alarm Message Display

• The following alarm messages are displayed while the STATUS (0, 1, 4) screen is shown in the Camera mode, or a STATUS screen is shown in the VTR mode.

If an alarm is generated while the STATUS 2, 3 screen is shown, the STATUS 0 screen returns to display the alarm. X See page 85.

• When an abnormality occurs in the VTR, a warning mes- sage with an error code is displayed.

X See page 85-86.

Alarm display area

Safety Zone Indication (Camera mode only)

The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CENTER MARK item on the LCD/VF [1/3] menu screen. X See page 71.

In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FORMAT menu screen, as shown below.

SAFETY ZONE

OFF

4:3

14:9

16:9

16:9+4:3

CENTER MARK

-

OFF

ON

OFF

ON

OFF

ON

OFF

ON

REC

ASPECT

DV-60I

DV-24P

4:3

Cannot be selected

DV-24PA

DV-50I

16:9

DV-25P

HDV-SD60P

HDV-SD50P

HDV-HD30P

[16:9]

HDV-HD25P

HDV-HD24P

26

Image 30

Contents GY-HD101 For Customer UsePage Important Safety Instructions For USA and Canada RemarquePort Cable Length Accessories LensMicrophoneMain Features Contents Contents Precautions for Proper Use IntroductionPeriodical Maintenance Precautions for Use of Head Cleaning TapeHead Cleaning Routine and Periodical Mainte- nanceBattery Pack to be Used Videocassette to be Used„ For recording and storing videotapes Best condition Characteristic CCD Phenomena CondensationCONTROLS, Indicators and Connectors Zoom Lens OptionalTh16 x 5.5BRMU Front Section Rear Section 5CAM/VTR Camera/VTR mode switch button 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch3TC Display TC/UB display switch LCD DoorRight Side Section DStand BGAIN Sensitivity selector switchCWHT.BAL White balance switch HHDV/DV LEDLeft Side Section Top Section FDISPLAY Display button GVTR VTR indicatorTop Section Cont’d KPLAY/STILL Play/still buttonIndications on the LCD Monitor and in the Viewfinder „ Status Screens„ Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Alarm Message Display „ Auto White Balance Indication Camera mode only„ Menu Setting Screen „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Preparations Basic SystemAttaching the Microphone Provided How to Attach the ViewfinderAttaching the Zoom Lens Provided Knob„ Inserting an SD Memory Card Inserting an SD Memory CardAbout the Viewfinder Cable „ Taking out the SD memory card„ Charging the Built-in Battery „ How to chargeAC Operation „ Attaching the Battery Pack on the GY HD100 Battery Operation„ Charging the Battery Pack „ Detaching the Battery Pack from the GY HD100„ Operating Time with Battery Pack „ Remaining Battery Power Display„ Battery Recharge Times „ Precautions for the Battery Pack„ Turning the Power OFF Turning the Power on„ Turning the Power on Preparations for Operation„ Unloading the Cassette Loading/Unloading the Cassette„ Cassette Loading ModeSetting and Displaying the Date and Time „ Setting the Date and Time Style„ Setting the Date and Time „ Displaying the Time and Date on the Screen„ Setting Displaying Time CodeDrop Presetting and Recording of Time CodeDrop frame/Non-drop frame mode NON„ Presetting user’s bit data Presetting and Recording of Time Code Cont’d„ Presetting time cord data „ Zero-resetting the Time Code or User’s Bit DataScreen Adjustment Viewfinder AdjustmentBack Focus Adjustment „ Adjustment procedure White Balance Adjustment„ White Balance Adjustment „ Error messages„ Setting the REC Item Setting the Video Format„ Setting the Frame Rate Item „ About the Motion Smooth FunctionCamera Settings Screen Size 43/169 Mode SelectionND Filter „ Adjusting Audio during Recording Audio Input Signal Selection„ Selecting the audio signal input „ Selecting the CH-2 channel input con Nector„ Monitoring Audio during Recording LOW/MIDDLE/HIGHShooting Operation Basic Recording Operation„ About the Focus Assist Function „ If the Record-Standby Mode Continues Shooting OperationFunction/Initial Setting Header REC Function„ How to set the Header REC menu screen Fast-Forward, Rewind Playback ModePlayback Procedure SearchStereo Outputting AudioMIX Monitor PB Audio CH DV„ Connecting the IEEE1394 Cable Using External ComponentsConnecting the Video Signal Cables „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Connections Backup Recording„ Settings „ OperationMenu Screen Configuration Menu ScreensSetting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo Format Menu Screen Native Connector G Unconnected Connected Output SignalInitial settings U model 7.5% E model 0.0% AutoCamera Operation Menu Screen 3200KOFF High Camera Process 1/2 Menu ScreenMiddle NormalCamera Process 2/2 Menu Screen 108%Advanced Process Menu Screen StandardColor Matrix Adjust Menu Screen Skin Color Adjust Menu ScreenStop Step Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable NoneAUDIO/MIC Menu Screen MIXLCD/VF 1/3 Menu Screen 70-80%Blue LCD/VF 2/3 Menu Screen Tape RemainTC/UB LCD/VF 3/3 Menu Screen LCD ContrastVF Contrast TC/UB/CLOCK Menu Screen ExecuteDrop Disable Header REC Menu ScreenDATE+TIME TIME/DATE Menu ScreenBARS+CAM Variation Range U model MM/DD/YY E model DD/MM/YYOthers 1/2 Menu Screen 3MINBlink Others 2/2 Menu Screen „ Loading a menu settings file File Manage Menu Screen„ Displaying the File Manage menu Screen „ Saving settings „ Error displaysFile Manage Menu Screen Cont’d „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory CardFeatures of the Camera Section How to Use Skin Detail„ Setting the skin detail function color and range Features of the Camera Section „ Using the Skin Detail FunctionOutputting color bars Others Display Status ActionError Code Error Details GY-HD100 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder ScreenTroubleshooting Symptoms RemedyEuropean Union How to Display the Hour MeterInformation for Users on Disposal of Old Equipment Business users Other Countries outside the European UnionSpecifications Accessories