JVC GY- HD101, GY-HD100 manual Off

Page 61

1.

IEEE1394 switch

HDV	VIDEO/Y
IEEE 1394
DV
	PR
OUTPUT	PR
LINE
DC INPUT	IEEE1394

2.

Signal flow

IEEE1394 cable

CAUTION

•Set the IEEE1394 switch on both devices to either HDV or DV.

•Start recording after making sure that both devices are properly connected.

6.

TC/UB

Date and Time

USING EXTERNAL COMPONENTS

When Using the GY-HD100U/GY-HD101E as Recording Unit

(Dubbing From Another Videocassette)

1.Set the IEEE1394 switch on left side of the GY-HD100.

DV	: When dubbing in DV format
HDV	: When dubbing in HDV format

2.Connect the units with the IEEE1394 cable.

3.Turn ON both units.

4.Place the GY-HD100 in the VTR MODE.

Press the CAM/VTR button to turn on the VTR indicator.

5.Set the frame rate.

Set the FRAME RATE item (60/30, 50/25, 24) on the VIDEO FORMAT menu to match the HDV/DV signal frame rate input from the IEEE1394 connector.

X See page 62.

6.Set the time code and user bit recording.

Set the TC DUPLI. [DV] item on the TC/UB/CLOCK menu screen. (Only for DV format)

OFF	: Records the TC/UB set in the
	camcorder.
ON	: Records the TC/UB for the
	IEEE1394 input.
Date and time data	: Records the data sent from the
	playback device.

MEMO

In HDV format, the TC/UB set in the camcorder is recorded regardless of the setting.

7.Insert the videocassettes.

GY-HD100	: Insert the videocassette to be
	dubbed to.
Playback unit	: Insert the recorded videocassette.

8.Start playback on the playback unit.

For details, see the instructions to the unit used for play- back.

•The playback picture from the playback unit appears on the GY-HD100’s LCD monitor and viewfinder screen.

9.Press the REC/VTR trigger button on the GY-HD100 to start recording.

To temporarily pause the recording, press the REC or VTR trigger button.

To restart the recording, press the REC or VTR trigger button again.

10.When dubbing is completed.

Press the REC/VTR trigger button or the STOP button on the GY-HD100 to stop recording, and then stop playback on the playback unit.

MEMO

Depending on the player, sound may not be heard momen- tarily from this unit when switching modes from STILL to PLAY.

57

Image 61

Contents For Customer Use GY-HD101Page Important Safety Instructions Remarque For USA and CanadaPort Cable Length LensMicrophone AccessoriesMain Features Contents Contents Introduction Precautions for Proper UseHead Cleaning Precautions for Use of Head Cleaning TapePeriodical Maintenance Routine and Periodical Mainte- nanceVideocassette to be Used Battery Pack to be Used„ For recording and storing videotapes Best condition Condensation Characteristic CCD PhenomenaZoom Lens Optional CONTROLS, Indicators and ConnectorsTh16 x 5.5BRMU Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the ViewfinderSetting Status Contents of Indications „ Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Menu Setting Screen „ Auto White Balance Indication Camera mode only„ Alarm Message Display „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Basic System PreparationsAttaching the Zoom Lens Provided How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory card„ How to charge „ Charging the Built-in BatteryAC Operation „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD100 „ Detaching the Battery Pack from the GY HD100„ Battery Recharge Times „ Remaining Battery Power Display„ Operating Time with Battery Pack „ Precautions for the Battery Pack„ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Displaying the Time and Date on the Screen „ Setting the Date and TimeDisplaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Presetting time cord data Presetting and Recording of Time Code Cont’d„ Presetting user’s bit data „ Zero-resetting the Time Code or User’s Bit DataViewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionScreen Size 43/169 Mode Selection Camera SettingsND Filter „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingBasic Recording Operation Shooting Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Settings Backup Recording„ Connections „ OperationMenu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo Format Menu Screen Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative Auto3200K Camera Operation Menu ScreenOFF Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenSkin Color Adjust Menu Screen Color Matrix Adjust Menu ScreenStop REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep NoneMIX AUDIO/MIC Menu Screen70-80% LCD/VF 1/3 Menu ScreenBlue Tape Remain LCD/VF 2/3 Menu ScreenTC/UB LCD Contrast LCD/VF 3/3 Menu ScreenVF Contrast Execute TC/UB/CLOCK Menu ScreenDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YY3MIN Others 1/2 Menu ScreenBlink Others 2/2 Menu Screen File Manage Menu Screen „ Loading a menu settings file„ Displaying the File Manage menu Screen „ Error displays „ Saving settingsFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsHow to Use Skin Detail Features of the Camera Section„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD100 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories