JVC GY-HD100, GY- HD101 Presetting and Recording of Time Code Cont’d, „ Presetting time cord data

Page 44

PREPARATIONS FOR OPERATION

Presetting and Recording of Time Code (Cont’d)

Time code (hour, min, sec, frame)

„Presetting time cord data

The time code and user’s bit data are preset on the TC/UB/ CLOCK menu screen.

1.Display the TC/UB/CLOCK menu screen.

Select the TC/UB/CLOCK item on the TOP MENU screen.

2.Set the time code (hours, minutes, seconds, frames).

1Rotate the SHUTTER dial to align the cursor (K) with TC PRESET, and then press the SHUTTER dial.

•The first digit of the time code blinks. The blinking digit is the one to be set.

2When the SHUTTER dial is pressed, the blinking digit changes.

3When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

4Repeat the procedure described in 2 and 3 above to set the desired value for all digits.

5After setting the frame digit, press the SHUTTER dial to make EXECUTE blink. The setting values are confirmed when the SHUTTER dial is pressed again.

To cancel the setting, select CANCEL and press the SHUTTER dial.

3.When all the digits are set

•Press the STATUS button to return to the normal screen

or

•Rotate the SHUTTER dial to align the cursor (K) with the PAGE BACK item, and then press the SHUTTER dial to return to the TOP MENU screen.

„Presetting user’s bit data

The user’s bit data are preset with the UB PRESET item on the TC/UB/CLOCK menu screen.

The method for setting is the same as the method for setting the time code described above.

•The user’s bit can be specified using numerals or alpha- betic letters from 0 to F for each digit.

•To record user’s bit data, set the UB REC item to ON.

CAUTION

It is not possible to set all the digits of the user’s bit data to “F”.

Reading of the data during playback will not be possible for an all-F setting.

„Zero-resetting the Time Code or User’s

Bit Data

This is performed with the TC or UB PRESET item on the TC/ UB/CLOCK menu screen. (Performed separately for the time code and the user’s bit data.)

1Rotate the SHUTTER dial to align the cursor (K) with the TC or UB PRESET item, and then press the SHUTTER dial.

2Rotate the SHUTTER dial to select ZERO PRESET as the setting value, and then press the SHUTTER dial.

MEMO

When a menu screen is not being displayed, you can zero reset the time code data by simultaneously holding down the USER2 button and the STOP button for about 1 second.

40

Page 43 Page 45
Image 44
Page 43 Page 45
Contents GY-HD101 For Customer UsePage Important Safety Instructions For USA and Canada RemarquePort Cable Length Accessories LensMicrophoneMain Features Contents Contents Precautions for Proper Use IntroductionPrecautions for Use of Head Cleaning Tape Head CleaningPeriodical Maintenance Routine and Periodical Mainte- nance„ For recording and storing videotapes Best condition Battery Pack to be UsedVideocassette to be Used Characteristic CCD Phenomena CondensationTh16 x 5.5BRMU CONTROLS, Indicators and ConnectorsZoom Lens Optional Front Section Rear Section 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch 3TC Display TC/UB display switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section BGAIN Sensitivity selector switch CWHT.BAL White balance switchDStand HHDV/DV LEDLeft Side Section Top Section GVTR VTR indicator Top Section Cont’dFDISPLAY Display button KPLAY/STILL Play/still buttonIndications on the LCD Monitor and in the Viewfinder „ Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d „ Status Screens in the Camera ModeSetting Status Contents of Indications Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Auto White Balance Indication Camera mode only „ Menu Setting Screen„ Alarm Message Display „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Preparations Basic SystemHow to Attach the Viewfinder Attaching the Zoom Lens ProvidedAttaching the Microphone Provided KnobInserting an SD Memory Card About the Viewfinder Cable„ Inserting an SD Memory Card „ Taking out the SD memory cardAC Operation „ Charging the Built-in Battery„ How to charge Battery Operation „ Charging the Battery Pack„ Attaching the Battery Pack on the GY HD100 „ Detaching the Battery Pack from the GY HD100„ Remaining Battery Power Display „ Battery Recharge Times„ Operating Time with Battery Pack „ Precautions for the Battery PackTurning the Power on „ Turning the Power on„ Turning the Power OFF Preparations for OperationLoading/Unloading the Cassette „ Cassette Loading„ Unloading the Cassette ModeSetting and Displaying the Date and Time „ Setting the Date and Time Style„ Setting the Date and Time „ Displaying the Time and Date on the Screen„ Setting Displaying Time CodePresetting and Recording of Time Code Drop frame/Non-drop frame modeDrop NONPresetting and Recording of Time Code Cont’d „ Presetting time cord data„ Presetting user’s bit data „ Zero-resetting the Time Code or User’s Bit DataScreen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance Adjustment „ White Balance Adjustment„ Adjustment procedure „ Error messagesSetting the Video Format „ Setting the Frame Rate Item„ Setting the REC Item „ About the Motion Smooth FunctionND Filter Camera SettingsScreen Size 43/169 Mode Selection Audio Input Signal Selection „ Selecting the audio signal input„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con Nector„ Monitoring Audio during Recording LOW/MIDDLE/HIGH„ About the Focus Assist Function Shooting OperationBasic Recording Operation „ If the Record-Standby Mode Continues Shooting OperationFunction/Initial Setting Header REC Function„ How to set the Header REC menu screen Playback Mode Playback ProcedureFast-Forward, Rewind SearchOutputting Audio MIXStereo Monitor PB Audio CH DVUsing External Components Connecting the Video Signal Cables„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF Backup Recording „ Settings„ Connections „ OperationMenu Screen Configuration Menu ScreensSetting Menu Screens TOP Menu Screen Video Format Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Connector G Unconnected Connected Output Signal Initial settings U model 7.5% E model 0.0%Native AutoOFF Camera Operation Menu Screen3200K Camera Process 1/2 Menu Screen MiddleHigh NormalCamera Process 2/2 Menu Screen 108%Advanced Process Menu Screen StandardStop Color Matrix Adjust Menu ScreenSkin Color Adjust Menu Screen Switch Mode Menu Screen REC Item Setting for Step Setting for VariableStep NoneAUDIO/MIC Menu Screen MIXBlue LCD/VF 1/3 Menu Screen70-80% TC/UB LCD/VF 2/3 Menu ScreenTape Remain VF Contrast LCD/VF 3/3 Menu ScreenLCD Contrast Drop TC/UB/CLOCK Menu ScreenExecute Disable Header REC Menu ScreenTIME/DATE Menu Screen BARS+CAMDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYBlink Others 1/2 Menu Screen3MIN Others 2/2 Menu Screen „ Displaying the File Manage menu Screen „ Loading a menu settings fileFile Manage Menu Screen File Manage Menu Screen Cont’d „ Saving settings„ Error displays „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory Card„ Setting the skin detail function color and range Features of the Camera SectionHow to Use Skin Detail Features of the Camera Section „ Using the Skin Detail FunctionOutputting color bars Others Display Status ActionError Code Error Details GY-HD100 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder ScreenTroubleshooting Symptoms RemedyHow to Display the Hour Meter Information for Users on Disposal of Old EquipmentEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories
Top Page Image Contents