JVC GY- HD101 manual Outputting Audio, Mix, Stereo, Monitor PB Audio CH DV, Select Audio Monitor

Page 57

PLAYBACK MODE

Outputting Audio

Setting

MONITOR	VTR indicator
SELECT
switch
SHUTTER
dial

STATUS button

CAM/VTR button

AUDIO menu screen

Confirm that the GY-HD100 is in the VTR mode. (VTR indicator: On)

1.Display the AUDIO menu screen.

Select the AUDIO item on the TOP MENU screen.

2.Set the AUDIO menu screen.

• AUDIO MONITOR Items

MIX	: Outputs mixed audio
STEREO	: Outputs stereo audio
• PB AUDIO CH [DV] Items
CH1/2	: To reproduce the sound (CH-1, CH-2)
	recorded during shooting.
MIX	: To reproduce the sound recorded during
	shooting (CH-1, CH-2) and the after-
	recorded sound (on CH-3 and CH-4)
	simultaneously.
CH3/4	: To reproduce the sound after-recorded
	on CH-3 and CH-4.

3.Set the MONITOR SELECT switch.

Refer to Table 1 below to make the setting.

4.Either of the following operations returns you to the nor- mal screen.

•Press the STATUS button or

•Return to the TOP MENU screen, select the EXIT item and press the SHUTTER dial.

MEMO

The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-HD100 records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input. (GY-HD100U/GY-HD101E only))

When the GY-HD100 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-4 channels, the PB AUDIO CH [DV] item on the AUDIO menu screen must be set.

After-recording on the CH-3 and CH-4 channels is not possi- ble.

	Table 1		* In HDV format, you can only select the settings within the bold frame.
	MONITOR	PB AUDIO CH [DV]	CH1/2	MIX	CH3/4
	MONITOR
	SELECT	AUDIO MONITOR
	SELECT

	CH-1	-	L/R:CH1	L/R:CH1+CH3	L/R:CH3

	BOTH	MIX	L/R:CH1+CH2	L/R:CH1+CH2+CH3+CH4	L/R:CH3+CH4
		STEREO	L:CH1 R:CH2	L:CH1+CH3 R:CH2+CH4	L:CH3 R:CH4

	CH-2	-	L/R:CH2	L/R:CH2+CH4	L/R:CH4

53

Image 57

Contents For Customer Use GY-HD101Page Important Safety Instructions Remarque For USA and CanadaPort Cable Length LensMicrophone AccessoriesMain Features Contents Contents Introduction Precautions for Proper UseHead Cleaning Precautions for Use of Head Cleaning TapePeriodical Maintenance Routine and Periodical Mainte- nanceBattery Pack to be Used Videocassette to be Used„ For recording and storing videotapes Best condition Condensation Characteristic CCD PhenomenaCONTROLS, Indicators and Connectors Zoom Lens OptionalTh16 x 5.5BRMU Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the Viewfinder„ Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Menu Setting Screen „ Auto White Balance Indication Camera mode only„ Alarm Message Display „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Basic System PreparationsAttaching the Zoom Lens Provided How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory card„ Charging the Built-in Battery „ How to chargeAC Operation „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD100 „ Detaching the Battery Pack from the GY HD100„ Battery Recharge Times „ Remaining Battery Power Display„ Operating Time with Battery Pack „ Precautions for the Battery Pack„ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Displaying the Time and Date on the Screen „ Setting the Date and TimeDisplaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Presetting time cord data Presetting and Recording of Time Code Cont’d„ Presetting user’s bit data „ Zero-resetting the Time Code or User’s Bit DataViewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionCamera Settings Screen Size 43/169 Mode SelectionND Filter „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingShooting Operation Basic Recording Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Settings Backup Recording„ Connections „ OperationMenu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo Format Menu Screen Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative AutoCamera Operation Menu Screen 3200KOFF Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenColor Matrix Adjust Menu Screen Skin Color Adjust Menu ScreenStop REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep NoneMIX AUDIO/MIC Menu ScreenLCD/VF 1/3 Menu Screen 70-80%Blue LCD/VF 2/3 Menu Screen Tape RemainTC/UB LCD/VF 3/3 Menu Screen LCD ContrastVF Contrast TC/UB/CLOCK Menu Screen ExecuteDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYOthers 1/2 Menu Screen 3MINBlink Others 2/2 Menu Screen „ Loading a menu settings file File Manage Menu Screen„ Displaying the File Manage menu Screen „ Saving settings „ Error displaysFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsFeatures of the Camera Section How to Use Skin Detail„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD100 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories