JVC GY- HD101, GY-HD100 manual Resetting the menu settings to the fac Tory settings

Page 85

MENU SCREENS

Execute	Complete

Reboot display

Execute	Complete
	Flashing
	Error display
Error

Resetting the menu settings to the fac-

tory settings

Select the RESET FILE.. item on the FILE MANAGE menu screen.

1.Turn the SHUTTER dial, bring the cursor (K) to SELECT and press the SHUTTER dial.

•The file name setting area for the file to be reset flashes.

2.Turn the SHUTTER dial, select the name of the file to reset, and press the SHUTTER dial.

CAM1, CAM2, CURRENT (current settings)

3.Turn the SHUTTER dial, bring the cursor (K) to the RESET item and press the SHUTTER dial.

•EXECUTE flashes.

4.With EXECUTE selected, turn the SHUTTER dial to reset the settings.

If the current menu settings and the factory settings have different video format settings, “REBOOT!” is displayed for 3 seconds, the camcorder turns off automatically and then turns on.

When this happens, the SUB NAME initial value, “[SCENE]” is displayed.

MEMO

Even if CAM1 and CAM2 are reset, the current settings are not reset.

To reset the currently set values, select “CURRENT”.

Initializing (formatting) an SD memory

card

Before initializing (formatting) a card:

1Insert and remove the SD memory card with the power to the camcorder OFF.

2Disable write-protection on the SD memory card.

3Check that an SD memory card has been inserted into the camcorder.

1.Turn the SHUTTER dial, bring the cursor (K) to the FOR- MAT SD CARD item and press the SHUTTER dial.

• CANCEL flashes.

2.Turn the SHUTTER dial, and when EXECUTE flashes, press the SHUTTER dial to initialize (format) the card.

If there is an error:

Check items 2 and 3 in “Before initializing (formatting) a card”.

81

Image 85

Contents For Customer Use GY-HD101Page Important Safety Instructions Remarque For USA and CanadaPort Cable Length LensMicrophone AccessoriesMain Features Contents Contents Introduction Precautions for Proper UseHead Cleaning Precautions for Use of Head Cleaning TapePeriodical Maintenance Routine and Periodical Mainte- nanceVideocassette to be Used Battery Pack to be Used„ For recording and storing videotapes Best condition Condensation Characteristic CCD PhenomenaZoom Lens Optional CONTROLS, Indicators and ConnectorsTh16 x 5.5BRMU Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the ViewfinderSetting Status Contents of Indications „ Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Menu Setting Screen „ Auto White Balance Indication Camera mode only„ Alarm Message Display „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Basic System PreparationsAttaching the Zoom Lens Provided How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory card„ How to charge „ Charging the Built-in BatteryAC Operation „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD100 „ Detaching the Battery Pack from the GY HD100„ Battery Recharge Times „ Remaining Battery Power Display„ Operating Time with Battery Pack „ Precautions for the Battery Pack„ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Displaying the Time and Date on the Screen „ Setting the Date and TimeDisplaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Presetting time cord data Presetting and Recording of Time Code Cont’d„ Presetting user’s bit data „ Zero-resetting the Time Code or User’s Bit DataViewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionScreen Size 43/169 Mode Selection Camera SettingsND Filter „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingBasic Recording Operation Shooting Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Settings Backup Recording„ Connections „ OperationMenu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo Format Menu Screen Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative Auto3200K Camera Operation Menu ScreenOFF Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenSkin Color Adjust Menu Screen Color Matrix Adjust Menu ScreenStop REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep NoneMIX AUDIO/MIC Menu Screen70-80% LCD/VF 1/3 Menu ScreenBlue Tape Remain LCD/VF 2/3 Menu ScreenTC/UB LCD Contrast LCD/VF 3/3 Menu ScreenVF Contrast Execute TC/UB/CLOCK Menu ScreenDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YY3MIN Others 1/2 Menu ScreenBlink Others 2/2 Menu Screen File Manage Menu Screen „ Loading a menu settings file„ Displaying the File Manage menu Screen „ Error displays „ Saving settingsFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsHow to Use Skin Detail Features of the Camera Section„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD100 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories