JVC GY-HD100, GY- HD101 manual Camera Process 2/2 Menu Screen, 108%

MENU SCREENS

CAMERA PROCESS [2/2] Menu Screen

	Item			Function/Setting (bold characters indicate initial settings)
WHITE CLIP		Sets the white clipping point on input video signals with a high luminance level.
		108%		: The white clipping point is set at a luminance level of 108%.
		100%		: The white clipping point is set at a luminance level of 100%. If the screen is too white at
				108%, set it to 100%.
KNEE			Sets whether to run the “knee” function, which compresses video signals over a certain level to render the tonality
			in the highlight areas, automatically or manually. Set “MANUAL” when you want to check the bright areas, and adjust
			the knee point manually.
			AUTO	: Adjusts the knee point automatically, according to the luminance level.
			MANUAL	: You can change the luminance level in the “LEVEL” item.
	LEVEL		Sets the start point for knee compression (knee point).
			Increase the number	: Raises the knee point level.
			Decrease the number : Lowers the knee point level.
			[Settings: 80%, 85%, 90%, 95%, 100%]
			MEMO
			When the “KNEE” item is set to “AUTO”, “-----” is displayed and this cannot be selected.
MOTION SMOOTH			Makes the video smoother when the tape is played back by adding frames to the signal recorded on the tape during
			progressive shooting.
			OFF	: Does not function.
			ON	: Functions.
			MEMO
			This can be set when you select “HDV-HD30p”, “HDV-HD25p”, or “HDV-HD24p” in the “REC” item on the VIDEO
			FORMAT menu screen.
			When this cannot be set, “-----” is displayed.
ADVANCED PROCESS..			Calls up the ADVANCED PROCESS menu screen.
			X See “ADVANCED PROCESS Menu Screen” on page 67.
PAGE BACK			When the cursor is in this position, press the SHUTTER dial to return to the CAMERA PROCESS [1/2] menu screen.

66