JVC GY- HD101, GY-HD100 Attaching the Zoom Lens Provided, Attaching the Microphone Provided, Knob

Page 33

PREPARATIONS

Attaching the Zoom Lens (Provided)

Hole

Clamp

1.Loosen the mount ring.

2.Attach the lens with its pin aligned with the hole in the mount.

Pin	3. Tighten the mount ring.
	4. Connect the cable connector.

5. Clamp the lens cable.

CAUTION

• Be sure to tighten the mount ring completely. Incomplete tightening may result in the lens dropping off or disturbed back focus.

• Set the GY-HD100’s power switch to “OFF” before the zoom lens is attached or detached.

Attaching the Microphone (Provided)

1. 3. Knob

2. Microphone

Microphone holder

5. Clamp

Connect the provided microphone to the microphone holder. Provided microphone is a phantom microphone.

1.Turn the knob on the microphone holder anticlockwise to loosen it and open the microphone holder.

2.Place the microphone in the microphone holder.

Place the microphone toward the front to prevent it from interfering with the cassette cover.

3.Turn the knob on the microphone holder clockwise to secure the microphone.

4.Connect the microphone cable to the INPUT1 or INPUT2 input connector on the GY-HD100.

5.Attach the microphone cable to the clamp.

6.Make sure to perform the correct setting for use of a phan- tom microphone.

X See page 46.

4. INPUT1, 2 connector

How to Attach the Viewfinder

To attach the viewfinder, slide it in the direction of the arrow.

Knob

Taking off the viewfinder

To take off the viewfinder, pull the knob in the direction of the arrow as you slide the viewfinder.

29

Image 33

Contents For Customer Use GY-HD101Page Important Safety Instructions Remarque For USA and CanadaPort Cable Length LensMicrophone AccessoriesMain Features Contents Contents Introduction Precautions for Proper UseHead Cleaning Precautions for Use of Head Cleaning TapePeriodical Maintenance Routine and Periodical Mainte- nanceBattery Pack to be Used Videocassette to be Used„ For recording and storing videotapes Best condition Condensation Characteristic CCD PhenomenaCONTROLS, Indicators and Connectors Zoom Lens OptionalTh16 x 5.5BRMU Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the Viewfinder„ Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Menu Setting Screen „ Auto White Balance Indication Camera mode only „ Alarm Message Display „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Basic System PreparationsAttaching the Zoom Lens Provided How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory card„ Charging the Built-in Battery „ How to chargeAC Operation „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD100 „ Detaching the Battery Pack from the GY HD100„ Battery Recharge Times „ Remaining Battery Power Display„ Operating Time with Battery Pack „ Precautions for the Battery Pack„ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Displaying the Time and Date on the Screen „ Setting the Date and TimeDisplaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Presetting time cord data Presetting and Recording of Time Code Cont’d„ Presetting user’s bit data „ Zero-resetting the Time Code or User’s Bit DataViewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionCamera Settings Screen Size 43/169 Mode SelectionND Filter „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingShooting Operation Basic Recording Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Settings Backup Recording„ Connections „ OperationMenu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo Format Menu Screen Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative AutoCamera Operation Menu Screen 3200KOFF Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenColor Matrix Adjust Menu Screen Skin Color Adjust Menu ScreenStop REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep NoneMIX AUDIO/MIC Menu ScreenLCD/VF 1/3 Menu Screen 70-80%Blue LCD/VF 2/3 Menu Screen Tape RemainTC/UB LCD/VF 3/3 Menu Screen LCD ContrastVF Contrast TC/UB/CLOCK Menu Screen ExecuteDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYOthers 1/2 Menu Screen 3MINBlink Others 2/2 Menu Screen „ Loading a menu settings file File Manage Menu Screen„ Displaying the File Manage menu Screen „ Saving settings „ Error displaysFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsFeatures of the Camera Section How to Use Skin Detail„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD100 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories