JVC GY- HD101, GY-HD100 manual Blinking Pattern Remaining Battery/Tape, Viewfinder Screen

Page 91

OTHERS

TALLY lamp

Blinks when remaining battery power or tape is low. (Only in Camera mode)

Blinking Pattern	Remaining Battery/Tape
Slow blinking	• Remaining battery power is low.
(once per sec.)	• Remaining tape time is equivalent to less
	than 3 minutes.
Fast blinking	• Tape has run out.
(four times per sec.)	• Irregularity has occurred in the VTR.

Alarm Sound

When remaining battery power becomes low, a warning sound is output from the monitoring loudspeaker and the PHONES jack.

(In Camera mode only)

When an irregularity occurs in the VTR, a warning sound is also output.

Whether or not alarm sound should be output and the vol- ume level are selected with the ALARM VR LEVEL item on the OTHERS [1/2] menu screen.

Depending on the alarm conditions, the warning indicators on the LCD monitor/viewfinder screen, the TALLY lamp, and alarm sounds appear as shown in the following table.

	Alarm Indications on LCD Monitor/	TALLY lamp	Alarm Sound	Condition
	Viewfinder Screen	TALLY lamp	Alarm Sound	Condition
	Viewfinder Screen
	VTR alarm indication			Dew formation (condensation) or error has oc-
	(Example)	I		curred in the VTR.
		I
		J		About 3 min. before tape end
		J		(displayed during recording).
		I		Tape end
		I		(displayed during recording).
		J		Remaining battery power is low.
		J

Display symbols	J	: Blinking once per second.
		: Sound interrupted once per second.

I: Blinking four times per second. : Continuous sound.

87

Image 91

Contents For Customer Use GY-HD101Page Important Safety Instructions Remarque For USA and CanadaPort Cable Length LensMicrophone AccessoriesMain Features Contents Contents Introduction Precautions for Proper UseRoutine and Periodical Mainte- nance Precautions for Use of Head Cleaning TapeHead Cleaning Periodical MaintenanceVideocassette to be Used Battery Pack to be Used„ For recording and storing videotapes Best condition Condensation Characteristic CCD PhenomenaZoom Lens Optional CONTROLS, Indicators and ConnectorsTh16 x 5.5BRMU Front Section Rear Section LCD Door 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch3TC Display TC/UB display switch 5CAM/VTR Camera/VTR mode switch buttonRight Side Section HHDV/DV LED BGAIN Sensitivity selector switchCWHT.BAL White balance switch DStandLeft Side Section Top Section KPLAY/STILL Play/still button GVTR VTR indicatorTop Section Cont’d FDISPLAY Display button„ Status Screens Indications on the LCD Monitor and in the ViewfinderSetting Status Contents of Indications „ Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Safety Zone Indication Camera mode only „ Auto White Balance Indication Camera mode only„ Menu Setting Screen „ Alarm Message DisplayLCD Closed Normal LCD Basic System PreparationsKnob How to Attach the ViewfinderAttaching the Zoom Lens Provided Attaching the Microphone Provided„ Taking out the SD memory card Inserting an SD Memory CardAbout the Viewfinder Cable „ Inserting an SD Memory Card„ How to charge „ Charging the Built-in BatteryAC Operation „ Detaching the Battery Pack from the GY HD100 Battery Operation„ Charging the Battery Pack „ Attaching the Battery Pack on the GY HD100„ Precautions for the Battery Pack „ Remaining Battery Power Display„ Battery Recharge Times „ Operating Time with Battery PackPreparations for Operation Turning the Power on„ Turning the Power on „ Turning the Power OFFMode Loading/Unloading the Cassette„ Cassette Loading „ Unloading the Cassette„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Displaying the Time and Date on the Screen „ Setting the Date and TimeDisplaying Time Code „ SettingNON Presetting and Recording of Time CodeDrop frame/Non-drop frame mode Drop„ Zero-resetting the Time Code or User’s Bit Data Presetting and Recording of Time Code Cont’d„ Presetting time cord data „ Presetting user’s bit dataViewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ Error messages White Balance Adjustment„ White Balance Adjustment „ Adjustment procedure„ About the Motion Smooth Function Setting the Video Format„ Setting the Frame Rate Item „ Setting the REC ItemScreen Size 43/169 Mode Selection Camera SettingsND Filter „ Selecting the CH-2 channel input con Nector Audio Input Signal Selection„ Selecting the audio signal input „ Adjusting Audio during RecordingLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingBasic Recording Operation Shooting Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Search Playback ModePlayback Procedure Fast-Forward, RewindMonitor PB Audio CH DV Outputting AudioMIX Stereo„ Displaying Alarms Using External ComponentsConnecting the Video Signal Cables „ Connecting the IEEE1394 CableDubbing with AV Devices HDV/DV Dubbing OFF „ Operation Backup Recording„ Settings „ ConnectionsMenu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo Format Menu Screen Auto Connector G Unconnected Connected Output SignalInitial settings U model 7.5% E model 0.0% Native3200K Camera Operation Menu ScreenOFF Normal Camera Process 1/2 Menu ScreenMiddle High108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenSkin Color Adjust Menu Screen Color Matrix Adjust Menu ScreenStop None Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable StepMIX AUDIO/MIC Menu Screen70-80% LCD/VF 1/3 Menu ScreenBlue Tape Remain LCD/VF 2/3 Menu ScreenTC/UB LCD Contrast LCD/VF 3/3 Menu ScreenVF Contrast Execute TC/UB/CLOCK Menu ScreenDrop Header REC Menu Screen DisableVariation Range U model MM/DD/YY E model DD/MM/YY TIME/DATE Menu ScreenBARS+CAM DATE+TIME3MIN Others 1/2 Menu ScreenBlink Others 2/2 Menu Screen File Manage Menu Screen „ Loading a menu settings file„ Displaying the File Manage menu Screen „ Error displays „ Saving settingsFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsHow to Use Skin Detail Features of the Camera Section„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD100 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingBusiness users Other Countries outside the European Union How to Display the Hour MeterInformation for Users on Disposal of Old Equipment European UnionSpecifications Accessories