JVC GY-HD100 manual Audio Input Signal Selection, Selecting the CH-2 channel input con Nector

Page 50

SETTING AND ADJUSTMENTS BEFORE SHOOTING

Audio Input Signal Selection

CH-2 INPUT switch

The GY-HD100 is provided with the INPUT1 connector and the INPUT2 connector for audio input.

Select the audio from the INPUT1 connector or the INPUT2 connector using the CH-2 INPUT switch for the audio to be recorded in CH-2.

AUDIO INPUT switch

Selecting the CH-2 channel input con-

nector

Select using the CH-2 INPUT switch.

INPUT1	: Inputs the audio from the INPUT1 connector
	into CH-2.
INPUT2	: Inputs the audio from the INPUT2 connector
	into CH-2.

MEMO

The audio from the INPUT1 connector is also input into CH- 1 regardless of the setting.

Monitor speaker

MONITOR SELECT FULL AUTO switch switch

MONITOR volume

CH-1 audio input	CH-1/CH-2
level volume	AUDIO SELECT switch
	CH-2 audio input level
	volume
	STATUS 1 screen

Audio level

Indicator level (reference)

∞

Selecting the audio signal input

Select the sound to be input to the INPUT1 or INPUT2 con- nector using the AUDIO INPUT switch.

The setting is made for each of INPUT1 or INPUT2 connec- tor.

LINE	: Set to this position when connected to audio
	equipment, etc.
	The reference input level is +4 dBs.
MIC	: Set to this position when using a dynamic micro-
	phone.
MIC+48V	: Set to this position when a microphone (phan-
	tom microphone) requiring +48 V DC power sup-
	ply is connected.

CAUTION

When connecting a component that does not require +48 V power supply, make sure that the switch is not set to MIC+48V before the component is connected.

MEMO

You can select the normal input level for MIC and MIC+48V in the INPUT1, 2 MIC REF. item on the AUDIO/MIC menu screen.

Adjusting Audio during Recording

For each audio channel, use the CH-1/CH-2 AUDIO SELECT switch to select whether the audio level adjustment should be set to AUTO mode or MANUAL mode.

Adjusting the audio input level control

The audio input level can be adjusted manually when the GY- HD100 is in the record, record-standby or stop mode.

1.Set the CH-1/CH-2 AUDIO SELECT switch of the channel whose audio level that you want to adjust manually to

MANUAL.

2.Rotate the audio input level control corresponding to the audio input level to be adjusted.

•Adjust so that the peak level does not exceed the –3 dB point when a loud sound is input.

46

Image 50

Contents GY-HD101 For Customer UsePage Important Safety Instructions For USA and Canada RemarquePort Cable Length Accessories LensMicrophoneMain Features Contents Contents Precautions for Proper Use IntroductionPeriodical Maintenance Precautions for Use of Head Cleaning TapeHead Cleaning Routine and Periodical Mainte- nance„ For recording and storing videotapes Best condition Battery Pack to be UsedVideocassette to be Used Characteristic CCD Phenomena CondensationTh16 x 5.5BRMU CONTROLS, Indicators and ConnectorsZoom Lens Optional Front Section Rear Section 5CAM/VTR Camera/VTR mode switch button 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch3TC Display TC/UB display switch LCD DoorRight Side Section DStand BGAIN Sensitivity selector switchCWHT.BAL White balance switch HHDV/DV LEDLeft Side Section Top Section FDISPLAY Display button GVTR VTR indicatorTop Section Cont’d KPLAY/STILL Play/still buttonIndications on the LCD Monitor and in the Viewfinder „ Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d „ Status Screens in the Camera ModeSetting Status Contents of Indications Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Alarm Message Display „ Auto White Balance Indication Camera mode only„ Menu Setting Screen „ Safety Zone Indication Camera mode onlyLCD Closed Normal LCD Preparations Basic SystemAttaching the Microphone Provided How to Attach the ViewfinderAttaching the Zoom Lens Provided Knob„ Inserting an SD Memory Card Inserting an SD Memory CardAbout the Viewfinder Cable „ Taking out the SD memory cardAC Operation „ Charging the Built-in Battery„ How to charge „ Attaching the Battery Pack on the GY HD100 Battery Operation„ Charging the Battery Pack „ Detaching the Battery Pack from the GY HD100„ Operating Time with Battery Pack „ Remaining Battery Power Display„ Battery Recharge Times „ Precautions for the Battery Pack„ Turning the Power OFF Turning the Power on„ Turning the Power on Preparations for Operation„ Unloading the Cassette Loading/Unloading the Cassette„ Cassette Loading ModeSetting and Displaying the Date and Time „ Setting the Date and Time Style„ Setting the Date and Time „ Displaying the Time and Date on the Screen„ Setting Displaying Time CodeDrop Presetting and Recording of Time CodeDrop frame/Non-drop frame mode NON„ Presetting user’s bit data Presetting and Recording of Time Code Cont’d„ Presetting time cord data „ Zero-resetting the Time Code or User’s Bit DataScreen Adjustment Viewfinder AdjustmentBack Focus Adjustment „ Adjustment procedure White Balance Adjustment„ White Balance Adjustment „ Error messages„ Setting the REC Item Setting the Video Format„ Setting the Frame Rate Item „ About the Motion Smooth FunctionND Filter Camera SettingsScreen Size 43/169 Mode Selection „ Adjusting Audio during Recording Audio Input Signal Selection„ Selecting the audio signal input „ Selecting the CH-2 channel input con Nector„ Monitoring Audio during Recording LOW/MIDDLE/HIGH„ About the Focus Assist Function Shooting OperationBasic Recording Operation „ If the Record-Standby Mode Continues Shooting OperationFunction/Initial Setting Header REC Function„ How to set the Header REC menu screen Fast-Forward, Rewind Playback ModePlayback Procedure SearchStereo Outputting AudioMIX Monitor PB Audio CH DV„ Connecting the IEEE1394 Cable Using External ComponentsConnecting the Video Signal Cables „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Connections Backup Recording„ Settings „ OperationMenu Screen Configuration Menu ScreensSetting Menu Screens TOP Menu Screen Video Format Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Native Connector G Unconnected Connected Output SignalInitial settings U model 7.5% E model 0.0% AutoOFF Camera Operation Menu Screen3200K High Camera Process 1/2 Menu ScreenMiddle NormalCamera Process 2/2 Menu Screen 108%Advanced Process Menu Screen StandardStop Color Matrix Adjust Menu ScreenSkin Color Adjust Menu Screen Step Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable NoneAUDIO/MIC Menu Screen MIXBlue LCD/VF 1/3 Menu Screen70-80% TC/UB LCD/VF 2/3 Menu ScreenTape Remain VF Contrast LCD/VF 3/3 Menu ScreenLCD Contrast Drop TC/UB/CLOCK Menu ScreenExecute Disable Header REC Menu ScreenDATE+TIME TIME/DATE Menu ScreenBARS+CAM Variation Range U model MM/DD/YY E model DD/MM/YYBlink Others 1/2 Menu Screen3MIN Others 2/2 Menu Screen „ Displaying the File Manage menu Screen „ Loading a menu settings fileFile Manage Menu Screen File Manage Menu Screen Cont’d „ Saving settings„ Error displays „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory Card„ Setting the skin detail function color and range Features of the Camera SectionHow to Use Skin Detail Features of the Camera Section „ Using the Skin Detail FunctionOutputting color bars Others Display Status ActionError Code Error Details GY-HD100 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder ScreenTroubleshooting Symptoms RemedyEuropean Union How to Display the Hour MeterInformation for Users on Disposal of Old Equipment Business users Other Countries outside the European UnionSpecifications Accessories