Panasonic DMC-TZ3PC, DMC-TZ3EB, DMC-TZ3EE Set the Initial Setting Refer to Caution, Confirmation

Page 11

•Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”)

[Caution for before settings]

Once "NONE(JAPAN)" (Area for Japan) or "P" (Area for North America) is selected with "INITIAL SETTINGS", other areas will not displayed even if "INITIAL SETTINGS" menu is displayed again, thus, the area can not be changed.

Select the area carefully.

Select the area with pressing “[ UP ] / [ DOWN ] of Cross key”, and then press the “[ RIGHT ] of Cross key”.

The only set area is displayed, and then press the “[ RIGHT ] of Cross key” after confirmation. (The unit is powered off automatically.)

Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.

•Step 6. CONFIRMATION:

The display shows “PLEASE SET THE CLOCK” when turn the Power on again. When the unit is connected to PC with USB cable, it is detected as removable media.

(When the “GT” or “GK” model suffix is selected, the display shows “PLEASE SET THE CLOCK” in Chinese.)

1)As for your reference Default setting condition is given in the following table.

•Default setting (After “INITIAL SETTINGS”)

	MODEL	VIDEO OUTPUT	LANGUAGE	DATE	REMARKS

a)	DMC-TZ3S	NTSC	Japanese	Year/Month/Date
b)	DMC-TZ3, TZ2P/PC/PL	NTSC	English	Month/Date/Year

c)	DMC-TZ3EB/EG/EGM/GC/GN/SG	PAL	English	Date/Month/Year
	DMC-TZ2EB/EG/EGM/GC/GN

d)	DMC-TZ3, TZ2EF	PAL	French	Date/Month/Year

e)	DMC-TZ3, TZ2EE	PAL	Russian	Date/Month/Year
f)	DMC-TZ3, TZ2GK	PAL	Chinese (simplified)	Year/Month/Date

g)	DMC-TZ3, TZ2GT	NTSC	Chinese (traditional)	Year/Month/Date
h)	DMC-TZ3, TZ2GD	NTSC	Korean	Year/Month/Date

11

Image 11

Contents Digital Camera Table of Contents Leakage Current Hot Check See Figure Safety PrecautionGeneral Guidelines Leakage Current Cold CheckFig. F1 How to Discharge the Capacitor on Flash PCBHow to Recycle the Lithium Ion Battery U.S. Only Before Use Replacement Procedure How to Replace the Lithium Battery Important Notice 1Other than U.S.A. and Canadian Market Service Navigation Recommended Lead Free Solder Service Parts Route Introduction General Description About Lead Free Solder PbFDefining methods How to Define the Model Suffix Ntsc or PAL modelDisplay the Initial Setting Temporary cancellation of factory settingTurn the Power on Confirmation Set the Initial Setting Refer to CautionDefault setting After Initial Settings Specifications Location of Controls and Components Page Error Code Memory Function Service ModeOIS How to read the error codeAbout * display in the above table How to returned to Normal DisplayPoint Confirmation of Firmware VersionConfirm the version Service Fixture and Tools Service Fixture & ToolsService Position When Replacing the Main PCBExtension Cable Connections for DMC-TZ2 Disassembly Flow Chart PCB Location Disassembly and Assembly InstructionsFor DMC-TZ3 Disassembly ProcedureFig. D2 For DMC-TZ2Removal of the Main P.C.B Removal of the Lens Unit Removal of the Sub P.C.B Fig. D9 Removal of the Battery Case Disassembly Procedure for LensPage Removal of the Drive Frame Frame and Both Side Cam Page Page Assembly for the Zoom Motor Unit and Master Flange Unit Remove the CCD unit except for replacing Removal of the CCD Unit Removal of the Zoom MotorUnit Grease apply point of lens unit are as follows Matrix Chart for Replaced Part and Necessary Adjustment Measurements and AdjustmentsMaintenace Cleaning Lens and LCD PanelS1. About Indication of The Schematic Diagram Diagrams and Replacement Parts ListS2.1. Overall Block Diagram S2. Block DiagramS3.1. Interconnection Diagram S3. Schematic Diagram25A S3.2. Flash Schematic DiagramTop Operation AF Assist Schematic Diagram S3.5. CCD Flex Schematic Diagram DMC-TZ2 S3.6. CCD Flex Schematic Diagram DMC-TZ3 Focus Encoder S3.7. Lens Flex Schematic DiagramS4.1. Flash P.C.B S4. Print Circuit BoardS4.2. Top Operation P.C.B. / S4.3. AF Assist P.C.B S4.4. CCD Flex P.C.B. DMC-TZ2 S4.5. CCD Flex P.C.B. DMC-TZ3 S4.6. Lens Flex P.C.B Page Important Safety Notice S5. Replacement Parts ListRef.No Part Name & Description Pcs Remarks Speaker ML614S/ZT Battery Ref.No Part Name & Description Camera BAG DE-A45BA Battery Charger S6.1. Frame and Casing Section S6. Exploded ViewS6.2. Packing Parts and Accessories Section S6.3. Packing Parts and Accessories Section