Panasonic WV-BP554 manual Editing the Special menu

** CAM SET UP **					** CAM SET UP **
CAMERA ID			OFF	↵	CAMERA ID			OFF	↵
ALC/ELC			ALC	↵	ALC/ELC			ALC	↵
SHUTTER			---		SHUTTER			---
AGC			ON		AGC			ON
SENS	UP		OFF		SENS	UP		OFF
SYNC			INT		SYNC			INT
MOTION DET			OFF	↵	MOTION DET			OFF	↵
LENS	DRIVE		DC		LENS	DRIVE		DC
END					END
		SET UP DISABLE					SET UP ENABLE

• Editing the SPECIAL menu

To edit the SPECIAL menu (change settings), proceed as for editing the CAM SET UP menu above.

Move the cursor to END after the words SET UP

ENABLE appear. Then press and simultane- ously for 2 seconds or longer.

The SPECIAL menu appears on the monitor. Select the item to be changed and change the setting as described for the CAM SET UP menu.

** SPECIAL **
UP SIDE DOWN	OFF
AP GAIN	....I....
PEDESTAL	.I
	-	+
CAMERA RESET	PUSH SW
RET END

Important Notice:

When the cursor is moved to END and the CAM SET UP menu closed after changing the parame- ters, the new values are stored in the EEPROM (Electric Erasable and Programmable Read Only Memory). These values remain valid until new val- ues are stored, even if the power of the camera is off.

-18-