Panasonic WV-BP554 Auto Iris Lens Connector, Flange-back Adjusting Ring, Down Button, Left Button

Page 7

qAuto Iris Lens Connector

This connector is used to connect with the auto iris lens by a 4-pin male connector that is supplied as a standard accessory (Part No. YFE4191J100).

wFlange-back Adjusting Ring

This ring is used to adjust the back focal length or picture focus. Rotate this ring clockwise for a C- mount lens or counterclockwise for a CS-mount lens.

eLens (Option)

rCamera Mounting Screw Hole

This hole is used to mount the camera onto a mounting bracket.

tDown Button ( )

This button is used to move the cursor downward. It is also used to select items in the CAM SET UP menu.

yRight Button ( )

This button is used to move the cursor to the right. It is also selects the mode and can be used to adjust some levels.

uLeft Button ( )

This button is used to move the cursor to the left. It also selects the mode and can be used to adjust some levels.

iUp Button ( )

This button is used to move the cursor upward. It is also used to select items in the CAM SET UP menu.

oSet Button ( )

This button is used to activate an item selected in the CAM SET UP menu.

!0 Gen-lock Termination Switch (Hi-Z, G/L 75Ω)

Set this switch to Hi-Z when a gen-lock video input signal is looped through. In all other cases, set this switch to 75Ω.

!1 Power indicator

This indicator lights up when the power of this camera is on.

!2 Gen-lock Input Connector (GEN-LOCK)

This connector is used to connect an external sys- tem for synchronization.

-5-

Image 7
Contents WV-BP550/WV-BP554 Symbol, within an equilateral triangle, is Contents Preface FeaturesHandle the camera with care PrecautionsClean the CCD faceplate with care Do not attempt to disassemble the cameraWV-BP554 Major Operating Controls and Their FunctionsPower indicator Auto Iris Lens ConnectorFlange-back Adjusting Ring Gen-lock Termination Switch Hi-Z, G/L 75ΩAC/DC Compatible Input Terminal DC 12V IN/AC 24V Video Output Connector Video OUTPower Cord Socket Alarm Output Terminal Alarm OUT/GNDWV-BP554 12V DC/24V AC DC Power SupplyConnections WV-BP550 120V AC 60HzRecommended wire gauge sizes for 24V AC line AC Power SupplyRG-6U Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Mounting from the bottom Installation of CameraMounting from the top Camera Setup Menu SET UPMotion Detector All Reset Operation Setup OperationEditing the CAM SET UP Menu Opening the Setup MenuImportant Notice Editing the Special menu To enter a blank space in the Camera ID Setting ProceduresCamera Identification Camera ID Setting To edit the Camera IDTo determine the display position of the Camera ID Light Control Setting ALC/ELCTo return to the CAM SET UP menu To erase all characters in the editing areaSuper Dynamic Function SUPER-D ALC Mode with SUPER-D onALC Mode with SUPER-D OFF and ELC Mode Shutter Speed Setting Shutter Electronic Sensitivity Enhancement Sens UP Gain Control Setting AGC ON/OFFImportant Notices Synchronization Setting SyncEnt VS Gen-lock Mode ExtvsLine-lock Sync Mode LL Motion Detector Setting Motion DET Drive Lens Drive Signal Selection LensCamera Picture Upside Down Positioning Aperture Gain Setting AP GainPedestal Level Setting Pedestal Special Menu SpecialPrevention of Blooming and Smear Specifications Optional Accessories Standard AccessoriesRegional Offices Video Imaging Systems Company