Panasonic WV-BP554 manual ALC Mode with SUPER-D on, Super Dynamic Function SUPER-D

Page 23

2-1. ALC Mode with SUPER-D ON

Super Dynamic Function (SUPER-D)

The important object in a scene is usually placed in the center of the monitor’s screen. In SUPER-D mode, more photometric weight is given to the center of the screen (where the important object is located) than to the edge of the picture (where a bright backlight would most likely be located). You can use the SUPER-D function if you select ALC. It eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight.

** CAM SET UP **

CAMERA ID

OFF

ALC/ELC

ALC

SHUTTER

---

 

AGC

 

ON

 

SENS

UP

OFF

 

SYNC

 

INT

 

MOTION DET

OFF

LENS

DRIVE

DC

 

END

SET UP ENABLE

1. Press after selecting ALC, the ALC CONT menu appears.

2.Move the cursor to the SUPER-D parameter and select ON.

** ALC CONT **

 

BACK LIGHT COMP

 

SUPER-D

OFF

 

MASK SET

 

 

LEVEL

...I

 

-

+

RET END

** ALC CONT **

 

BACK LIGHT COMP

 

SUPER-D

 

 

ON

 

LEVEL

...I

 

-

+

RET END

3.If you want to adjust the video output level, move the cursor to the "I" position. Adjust to the desired

level by pressing or .

4.Move the cursor to RET and press to return to the CAM SET UP menu. (To return to the camera picture, move the cursor to END and press .)

-21-

Image 23
Contents WV-BP550/WV-BP554 Symbol, within an equilateral triangle, is Contents Preface FeaturesHandle the camera with care PrecautionsClean the CCD faceplate with care Do not attempt to disassemble the cameraWV-BP554 Major Operating Controls and Their FunctionsPower indicator Auto Iris Lens ConnectorFlange-back Adjusting Ring Gen-lock Termination Switch Hi-Z, G/L 75ΩAC/DC Compatible Input Terminal DC 12V IN/AC 24V Video Output Connector Video OUTPower Cord Socket Alarm Output Terminal Alarm OUT/GNDWV-BP554 12V DC/24V AC DC Power SupplyConnections WV-BP550 120V AC 60HzRecommended wire gauge sizes for 24V AC line AC Power SupplyRG-6U Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Mounting from the top Installation of CameraMounting from the bottom Camera Setup Menu SET UPMotion Detector All Reset Operation Setup OperationImportant Notice Opening the Setup MenuEditing the CAM SET UP Menu Editing the Special menu To enter a blank space in the Camera ID Setting ProceduresCamera Identification Camera ID Setting To edit the Camera IDTo determine the display position of the Camera ID Light Control Setting ALC/ELCTo return to the CAM SET UP menu To erase all characters in the editing areaSuper Dynamic Function SUPER-D ALC Mode with SUPER-D onALC Mode with SUPER-D OFF and ELC Mode Shutter Speed Setting Shutter Electronic Sensitivity Enhancement Sens UP Gain Control Setting AGC ON/OFFImportant Notices Synchronization Setting SyncEnt VS Gen-lock Mode ExtvsLine-lock Sync Mode LL Motion Detector Setting Motion DET Drive Lens Drive Signal Selection LensCamera Picture Upside Down Positioning Aperture Gain Setting AP GainPedestal Level Setting Pedestal Special Menu SpecialPrevention of Blooming and Smear Specifications Optional Accessories Standard AccessoriesRegional Offices Video Imaging Systems Company