4.Repeat step 1 to 3 to mask the desired area.To cancel masking, move the cursor to that area and press 
.
Turns to white |
Blinking |
5.After masking is completed, press 
for 2 sec- onds or longer. The ALC CONT menu appears.
6.If you want to change the video output level (pic- ture contrast), move the “I” cursor for LEVEL and adjust the level.
7.Move the cursor to RET and press 
to return to the CAM SET UP menu. (To return to the camera picture, move the cursor to END and press the set button.)
3. Shutter Speed Setting (SHUTTER)
Note: When ON is selected for
To select electronic shutter speed, select OFF for
You can select an electronic shutter speed of 1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, or 1/10 000 seconds.
This function is effective to raise the sensitivity in low light conditions when OFF is selected for ALC.
** CAM SET UP **
CAMERA ID | OFF | ↵ | |
ALC/ELC | ALC | ↵ | |
SHUTTER |
| ||
AGC |
| ON |
|
SENS | UP | OFF |
|
SYNC |
| INT |
|
MOTION DET | OFF | ↵ | |
LENS | DRIVE | DC |
|
END | SET UP ENABLE | ||
Move the cursor to the SHUTTER parameter and select the electronic shutter speed.
The preset values for SHUTTER (electronic shutter
speed) change by pressing 
or 
as follows:
OFF (1/60) 
1/100 
1/250 
1/500
1/10000 
1/4000 
1/2000 
1/1000 