2.Move the pointer to the character to be edited by
pressing 
or 
. Then move the cursor to the character area and select a new character.
3.Press 
to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press 
. All charac- ters in the editing area disappear.
To determine the display position of the CAMERA ID
1.Move the cursor to POSI, and press 
. The dis- play shown below appears and the CAMERA ID starts blinking.
Blinking
2.Move the CAMERA ID to the desired position by pressing 
/ 
/ 
/ 
.
3.Press 
to fix the position of the CAMERA ID. The mode returns to the previous CAMERA ID menu.
Notes:
•The CAMERA ID stops at the edges of the monitor screen.
•The CAMERA ID moves faster if any of 
/
/ 
/ 
is kept pressed for a second or longer.
To return to the CAM SET UP menu
Move the cursor to RET and press 
. The CAM SET UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the light control mode according to the lens type.
ALC: If you use the auto iris lens, select this parameter.
ELC: If you use a fixed or manual iris lens, select this parameter.
** CAM SET UP **
CAMERA ID | OFF | ↵ | |
ALC/ELC | ALC | ↵ | |
SHUTTER |
| ||
AGC |
| ON |
|
SENS | UP | OFF |
|
SYNC |
| INT |
|
MOTION DET | OFF | ↵ | |
LENS | DRIVE | DC |
|
END | SET UP ENABLE | ||
1.Move the cursor to the ALC/ELC parameter.
2.Select ALC or ELC.