Special Effect Features
Photo Title
You can use PhotoShot images stored on a Memory Card to record a WIPE or MIX effect on a cassette.
Note
Before you begin
•Connect the Palmcorder to a power source. (pp. 14, 15)
•Set POWER to OFF before inserting a recorded Memory Card. (pp. 48, 49)
When Photo Title is set to ON, the selected | 1 |
image and Title will appear before each | |
recording is made. | |
WIPE : The Photo title is replaced with the | 2 |
current scene in a wiping motion.
3
MIX : The photo title is replaced with the current scene in a gradual mixing effect.
Set POWER to CAMERA.
Press MENU to display the CAMERA FUNCTIONS menu screen. Then
rotate and press JOG KEY to select
PHOTO TITLE .
Rotate and press JOG KEY to select and set MODE and then TITLE .
1st : Select and set MODE (WIPE or MIX).
2nd : Select and set TITLE to “SET”.
•“PLEASE WAIT” appears
•The Multi image screen is displayed.
2, 3, 4
JOG KEY 1POWER
2MENU
5REC/
PAUSE
4 Rotate and press JOG KEY to select and set an image.
•“PLEASE WAIT” is displayed while image is processed. Then, “PHOTO TITLE SET” is displayed for approx.
3 seconds, and the screen goes back to the Camera mode screen.
•After Photo Title is performed, Digital Function turns off.
5 Press REC/PAUSE to start recording with Photo Title.
•WIPE or MIX screen is displayed at the beginning of the recording. Then the Photo Title setting will be cleared automatically.
26 |
|
Forassistance, pleasecall: |