Panasonic PV-DV73 Replacing the Bulb, About the Memory Card MultiMediaCard or SD Memory Card

Notes On Operations

Replacing the Bulb	Before you begin
	• Set POWER to OFF.

1

2

Insert a rigid wire, such as an extended paper clip into point (A) and lift cover up.

(A)

Using Tweezers or needle-nose pliers, carefully remove bulb.

•Take unit to servicenter if you need assistance.

3

4

Replace bulb using a clean cloth or tissue. (Do not touch with fingers.)

Replace lens cover.

Note

• Handle bulb gently. Excessive force may cause bulb to crack.

DANGER:

Use only replacement bulb (PART NO. LSLL0028) supplied by Panasonic to reduce risk of fire. Handle new bulb with cloth or tissue as skin oils decrease bulb life. Remove lens cover and allow bulb to cool before replacing to avoid possible burn hazard.

Notice

This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org.>

About the Memory Card (MultiMediaCard or SD Memory Card)

•Model PV-DV73 can be used with either a MultiMediaCard or a SD Memory Card.

•Both of these exterior Memory Cards (MultiMediaCard and SD Memory Card) are lightweight and removable.

•Both Memory Cards (MultiMediaCard and SD Memory Card) are offered in a variety of memory sizes, so you can purchase a higher capacity Memory Card if desired.

For Your Information

93