Panasonic PV-DV73 Using the Built-in Light, Remote Control, To operate Camera functions

Using the Built-in Light

To brighten the natural colors in a scene.

Before Using

Before you begin

•Connect the Palmcorder to a power source. (pp. 14, 15)

•Set POWER to CAMERA or M-CARD.

Before

Built-in Light

Note

•Using Light reduces battery time.

•Provide adequate ventilation if using Light in a hot environment for a long time.

•Set LIGHT to OFF when not in use.

•When replacing the bulb, see page 93.

1 Hold down LIGHT for more than

0.7second to turn ON or OFF.

• “” will appear on the screen.

1LIGHT

Caution

This light becomes hot during operation. Make sure nothing covers the light during operation.

Use

Remote Control

You can operate the major functions of your Palmcorder from up to approximately 5 m (16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and press the desired buttons (Remote Sensor is located under the lens).

	To operate Camera functions:
	Set POWER to CAMERA.
	To operate VCR functions:
	Set POWER to VCR.
Remote Sensor
Controlled Functions
• Rec/Pause (p. 18)	• FF/Search (p. 33)
• Tele (Zoom) (p. 21)	• REW/Search (p. 33)
• Wide (Zoom) (p. 21)	• Pause/Select (p. 35)
• Date/Time (p. 111)	• Stop/Set (pp. 16, 17, 31, 47)
• Reset (p. 45)	• Slow/Frame Advance (Forward)
• PhotoShot (p. 20)	(pp. 34, 35)
• Display On TV (p. 38)	• Slow/Frame Advance (Backward)
• Counter/Time Code (p. 112)	(pp. 34, 35)
• Audio Dubbing (p. 44)	• Index Search (Forward) (p. 36)
• Record (p. 47)	• Index Search (Backward) (p. 36)
• Menu (pp. 17, 45)	• Speaker Volume (p. 32)
• Play (pp. 31, 47)

9