Transferring Your Images (Macintosh)
You can transfer images from your Palmcorder Memory Card to your Macintosh.
System Requirements
(for Built-in SD Drive/ArcSoft Software)
•Mac OS 9.0~9.1
•Mac OS 8.6~9.1 (for ArcSoft Software)
•iMac, iBook or Power Macintosh® G3 with USB port or Power Mac™ G4
•RAM: 64 MB or more
•
•USB Port
•Mouse or other pointing device
•210 MB minimum available hard disk space (for ArcSoft Software)
•High color (16 bit) or more (for ArcSoft Software)
*Even if system requirements are met, there is no guarantee that the included software will work on all personal computers.
Connection
2
USB Terminal | USB Terminal |
3
USB Cable (supplied)
1 Turn on your PC.
2 Set the Palmcorder POWER to
3 Connect the Palmcorder to your Macintosh using the USB Cable (supplied).
Note
• For extended use, it is recommended that you use the AC Adaptor as a power source.
PC Connection
89