Before Using
Attaching Shoulder Strap
Remove Battery Pack before completing the following steps:
1 Undo strap ends
from buckles.
2 Thread strap ends through Strap Rings on Camcorder.
Adjust the Length of the Shoulder Strap
Pull a loop of strap from buckle, then pull strap tight to shorten or lengthen.
Hand Strap
3 | 3 | 2 |
ends into buckles. | 1 |
Adjust Hand Strap length to fit your hand as min. 25.4 mm (1 inch) shown.
Lens Cap
Attaching the Lens Cap
Strap:
Thread the Strap through the Lens Cap attachment ring as illustrated at left.
Attaching the Lens Cap Cord to the Hand Strap: Remove the Hand Strap from the front clasp and thread the Strap through the loop in the Lens Cap Cord. Reattach the Hand Strap.
12
For assistance, please call :