![](/images/new-backgrounds/1316392/31639243x1.webp)
Copying your Tapes (dubbing)
Connections | Before you begin... |
| • Make |
| |
| • Turn both units on. |
| • Set VCR input signal to LINE. |
| Please see VCR owner’s manual. |
| • Set Camcorder POWER to VCR. |
STOP
Source (Playing) Camcorder
Audio/
Video Out
PLAY
STILL
1 Insert a pre-recorded tape
into Camcorder and a blank tape with record tab into VCR.
2 Press PLAY on Camcorder, then press STILL at starting point.
3 Press REC, then STILL/PAUSE on VCR.
4 Press STILL on Camcorder and STILL/ PAUSE on VCR to start copying.
5 Press STOP on both units to stop copying.
Note:
•Camcorder will only playback tapes recorded in SP or SLP mode.
•Dubbing may reduce picture quality.
CAUTION:
Monitor with your TV
•Turn TV on and tune to VCR channel (CH3 or CH4).
•Set TV/VCR Selector on VCR to VCR.
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
22
For assistance, please call :