![](/images/new-backgrounds/1316392/31639239x1.webp)
Playing Back Recordings
Before you begin...
•Connect Camcorder to power source.
•Insert recorded tape.
Playback on EVF or LCD Monitor
1 Press
•If you want to playback on EVF, close and lock LCD monitor.
1
3 D
Speaker
2 Set POWER to VCR.
• If tape has no record tab, auto |
playback begins. |
• EVF or LCD monitor turns on/off by |
the POWER switch. |
BRIGHT
ADJUSTMENT
3 | A | |
E | ||
|
C B
STILL
2
Tracking Control
Auto Tracking
Continuously analyzes each recording for optimum picture quality.
Manual Tracking
Some recordings require manual adjustment to reduce noise.
Press UP or DOWN until Playback picture clears up.
Press DISPLAY to return to Auto Tracking.
• EVF shuts off when LCD monitor is |
opened and turns back on when LCD |
is closed. |
3 Playback function buttons. A REW : Rewind tape.
B PLAY : Play tape.
C STOP : Stop tape.
D BRIGHT : Adjust LCD monitor brightness.
EVOLUME: During playback, adjust
volume of speaker.
Press “T” : Volume up (+).
Press “W” : Volume down
Note:
•Using LCD monitor reduces battery operating time. Return LCD monitor to locked position when not in use.
Special Effects
Quick Visual Search
Search Speed
• SP (Standard Play) : 3 times normal.
•SLP (Super Long Play) : 9 times normal.
During playback, press:
•FF : fast forward search
•REW : rewind search
Press again or press PLAY for normal play.
Still Picture
Press STILL to freeze picture. Press again for normal play.
This feature works best in SLP mode (page 11).
Note:
•During search, horizontal noise bars will appear. Audio is muted.
•To protect video heads and tape, operating
modes will revert as follows after 5 minutes:
Still Stand-by
Power
•Tape
20
For assistance, please call :