Playing Back Recordings
TV Playback or Viewing | Before you begin... | |
| • Connect Camcorder to power source. | |
Connect Camcorder to a TV to view | ||
• Make all | ||
playback or recordings in progress. | ||
|
Connections
Audio/
Video Out
VCR Playback using PlayPak
Load Battery in PlayPak
1 Set POWER to:
VCR ➞ view playback. CAMERA ➞ view picture as it is
recorded.
2 Turn TV ON and set to LINE INPUT. See TV owner’s manual.
3 Begin playback or recording.
Basic Operation
Remove Battery lid and insert AA battery.
• Do not reverse polarity.
• Replace battery when tape loading/unloading takes longer than usual.
Insert Cassette in PlayPak
| 1 Turn | cassette Tape Wheel in direction of |
1 | arrow to take up any slack. | |
2 Slide RELEASE to open cassette lid. |
23 Insert the cassette with the window up and on the left, then snap lid shut.
| 3 | • Do not obstruct cassette |
| reel while loading. | |
|
| • Allow PlayPak Load |
|
| Detector to fully retract |
|
| before using in VHS VCR. Load Detector |
Remove | Cassette | |
1 | 2 | 1 Slide RELEASE and wait for lid to open. |
|
| |
|
| 2 Push cassette out through hole in bottom of |
|
| PlayPak with your finger. |
21