Panasonic WV-CW964 operating instructions Features, Standard Accesories

Page 5

FEATURES

This Color CCTV Camera is a video surveillance device that incorporates a 1/4-type {1/4"} CCD, a 30x zoom lens, preset and pan and tilt capabilities in a dome configuration.

■Super Dynamic 3 (SUPER-D 3)

SUPER-D 3 can capture clear images of subjects whose illumination is extremely different (page 26).

■New DSP for High Sensitivity

A new noise reduction system lowers minimum illuminance to 0.5 lux{fc} in the color mode and 0.04 lux{fc} in the black and white mode.

■Auto Night time Switching to Black

and White Mode

The camera can be configured to switch to the black and white mode automatically under low light condi- tions for clear images, even at night.

■Digital Flip

Normally, a camera needs to stop when it points straight down during a tilt operation. With digital flip, however, the camera is able to tilt from 0° to 180° in a single motion. This makes it possible to track subjects passing directly under the camera more smoothly.

Digital Flip Operation

Tilting

The picture is flipped

Tilting upwards.

downwards

when the camera is

 

 

 

 

 

pointing straight down

 

 

 

 

 

(at around 135°).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

· · · Digital flip is performed only when the system controller joystick is held downwards.

■Privacy Zone Function

The privacy zone function can mask specific areas of the scene from view.

■Patrol Function

The patrol function can store manual camera move- ment routines for automatic playback. For example, you can set the camera the movements of the people to be monitored, by replaying the stored parameters complicated move-ments are done automatically.

■Camera Position Memory

The system can be configured with up to 256 camera positions. A particular camera position can be selected and viewed by entering the applicable preset number on the system controller 10-key pad.

■Motion Detection

The system can be configured so any motion on the monitor screen during surveillance causes output of an alarm signal.

This function can be used to structure a system with a VCR that records images of nighttime intruders.

■Internal Heating Fan

Prevents snow and frost from building up on the dome cover.*1

■Waterproofing Specifications

Outdoor enclosure based on IP66*2 of IEC60529 standard.

*1 Does not operate in environments with ambient temperatures under -40 °C {-40 °F}. In environments over -40 °C {-40 °F} defrosting may not function if wind and snow are too strong. Use it with the power on continuously to keep the temperature inside the camera over -10 °C {14 °F}.

*2 Waterproof structure resistant to powerful jetting as classified by the International Protection code.

STANDARD ACCESORIES

Operating Instructions (this manual) . . . . . . . . . .1 pc. Warranty Card . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc. The following items are for installation.

8P Alarm Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc. 4P Alarm Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.

Connector for 24 V AC . . . . . . . . . . . . . . . . . . . . .1 pc. Front/rear sun shield . . . . . . . . . . . . . . . . . . . . . . .1 set Front/rear sun shield mounting screws . . . . . . . .

. . . . . . . . . . . . . . . .2 pcs. (*one screw is a spare) Waterproof cap . . . . . . . . . . . . . . . . . . . . . . . . . .3 pcs.

-5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating Instructions English Version Important Safety Instructions Limitation of Liability Disclaimer of WarrantyStandard Accesories FeaturesPrecautions Operating Precautions Combining devices Self-diagnosing FunctionContents Ensuring Trouble-free Operation ConstructionInstallation Precautions About effects on image quality Important hints to help with the installationCommunication Parameters DIP Switch DIP Switch SettingsUnit Number DIP Switch DIP Switch Unit Number RS485 Communication Parameters DIP SwitchAssemble procedure Camera InstallationPrecautions Mounting the CameraMounting the Bracket Attach the brackets to the camera Installing the bracketsAC Power Supply Connection Alarm In/Out RatingsAccessory Connector Information ConnectionsConnect this to 24 V AC Class 2 Power Supply only How to Assemble the Cable with the Accessory ConnectorEnables X ON/X OFF data flow control RS485 SetupUSE AUTO1Displaying the Setup Menu Using the Setup MenuCamera ID Settings When using the WV-CU650Preset Position Settings Scene Select SettingsScene Select Settings Position Setting Position SETPreset ID Setting Preset ID To copy the preset ID of another position number Language SettingAdvanced Menu Settings ALC Camera SettingsUsing the Camera Setup Menu OFF Synchronization Sync Adjusting the Phase for Line-lock SynchronizationWhite Balance White BAL AWC→PUSH SETDigital Noise Reduction DNR Resolution ResolutionBlack and White Mode BW Mode Example Auto Focus AF ModeZoom Limit Zoom Limit Auto Image Stabilizer StabilizerUsing the Pan/Tilt Setup Menu PAN/TILT SettingsPosition Number Selection Preset Light Control ALC/MANUALScene File Setting Scene File Auto Focus AF ModePreset Speed Setting Preset Speed Deleting a Preset Position DELApan HomeSEQ SortPAN Limit Configuring Auto PAN Detailed SettingsAuto PAN Key Setting Auto PAN KEY When Learn is selected Patrol Function Setting PatrolWhen Play is selected Image Hold Setting Image Hold Privacy Zone Setting Privacy ZoneArea Title Setting Area Title Digital Flip Setting Digital FlipProportional Pan/Tilt Setting PROPO. P/T Cleaning Settings Cleaning Tilt Angle Setting Tilt AngleUsing the Alarm Setup Menu Alarm SettingsConfiguring Detailed Motion Detector Settings for Mode ModePATROL1 1POSIAutopan 2POSI AlarmPATROL2 3POSIALL Special SettingsUsing the Special Setup Menu Returning Camera Settings to Their Defaults Adjusting the Preset Positions RefreshCamera Reset To delete a blemish compensation patternUsing the Scene Select Setting Menu Scene Select SettingPassword Lock Settings Password SettingsTurning Password Lock On and Off Changing the PasswordOK Reset RET TOP Shortcuts Controller Operation SettingIris Close FIX TroubleshootingProblem 40-41 39-40 Periodically check the power cord General SpecificationsPan and Tilt LensMain Functions Page Panasonic System Solutions Company
Top Page Image Contents