Panasonic WV-CW964 operating instructions Problem

Page 50

Problem

Poor picture color

Image flicker

Afterimages in the picture

Black and white picture

Frequent switching between the color and the black and white modes

White specks in the picture

A circular object appear in the picture (when the camera is pointing straight down)

Menu does not open.

Cause and Recommended Action

•Check the white balance setting.

•Use the special setup menu to adjust picture quality.

•Is the dome cover or lens of the camera dirty? If so, clean them.

•If Super Dynamic 3 is turned on, turn it off.

•Check the DNR setting.

•The camera has an auto black and white switching mode function. Check the setting of this mode.

•Adjust the black and white mode switching level, and the duration time setting.

•Use the PIX OFF function to perform blemish compensation.

•This is caused by the shape of the dome cover and is not a malfunction.

•Is the camera connected correctly? See the operating instructions that come with the system controller you are using.

•Are camera communication settings configured correctly?

Reference Pages

29

42

7

26-27

29

29

29

42

7

—

13-15

19-20

21

-50-

Image 50

Contents Operating Instructions English Version Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures Standard AccesoriesPrecautions Operating Precautions Self-diagnosing Function Combining devicesContents Construction Ensuring Trouble-free OperationInstallation Precautions Important hints to help with the installation About effects on image qualityDIP Switch Settings Communication Parameters DIP SwitchUnit Number DIP Switch RS485 Communication Parameters DIP Switch DIP Switch Unit NumberPrecautions Camera InstallationAssemble procedure Mounting the CameraMounting the Bracket Installing the brackets Attach the brackets to the cameraAccessory Connector Information Alarm In/Out RatingsAC Power Supply Connection ConnectionsHow to Assemble the Cable with the Accessory Connector Connect this to 24 V AC Class 2 Power Supply onlyUSE RS485 SetupEnables X ON/X OFF data flow control AUTO1Camera ID Settings Using the Setup MenuDisplaying the Setup Menu When using the WV-CU650Scene Select Settings Scene Select SettingsPreset Position Settings Position Setting Position SETPreset ID Setting Preset ID To copy the preset ID of another position number Language SettingAdvanced Menu Settings ALC Camera SettingsUsing the Camera Setup Menu OFF White Balance White BAL Adjusting the Phase for Line-lock SynchronizationSynchronization Sync AWC→PUSH SETDigital Noise Reduction DNR Resolution ResolutionBlack and White Mode BW Mode Zoom Limit Zoom Limit Auto Focus AF ModeExample Auto Image Stabilizer StabilizerPosition Number Selection Preset PAN/TILT SettingsUsing the Pan/Tilt Setup Menu Light Control ALC/MANUALPreset Speed Setting Preset Speed Auto Focus AF ModeScene File Setting Scene File Deleting a Preset Position DELSEQ HomeApan SortPAN Limit Configuring Auto PAN Detailed SettingsAuto PAN Key Setting Auto PAN KEY When Learn is selected Patrol Function Setting PatrolWhen Play is selected Privacy Zone Setting Privacy Zone Image Hold Setting Image HoldArea Title Setting Area Title Digital Flip Setting Digital FlipProportional Pan/Tilt Setting PROPO. P/T Tilt Angle Setting Tilt Angle Cleaning Settings CleaningConfiguring Detailed Motion Detector Settings for Mode Alarm SettingsUsing the Alarm Setup Menu ModePATROL1 1POSIAutopan PATROL2 Alarm2POSI 3POSIALL Special SettingsUsing the Special Setup Menu Camera Reset Adjusting the Preset Positions RefreshReturning Camera Settings to Their Defaults To delete a blemish compensation patternScene Select Setting Using the Scene Select Setting MenuTurning Password Lock On and Off Password SettingsPassword Lock Settings Changing the PasswordOK Reset RET TOP Controller Operation Setting ShortcutsIris Close Troubleshooting FIXProblem 40-41 39-40 Periodically check the power cord Pan and Tilt SpecificationsGeneral LensMain Functions Page Panasonic System Solutions Company