Panasonic WV-CW964 Patrol Function Setting Patrol, When Play is selected, When Learn is selected

Page 35

(7) Patrol Function Setting (PATROL)

The patrol function remembers manual operations for later automatic playback when they are needed.

1.Aim the camera, with the menu closed, at the start point of the routine you want it to remember.

2.Move the cursor to NUMBER, and then tilt the joystick left or right to specify the number of patrol routines. Tilting the joystick cycles through settings in the sequence shown below. The amount of storage time available depends on the number of routines. The storage time display changes in the sequence shown below. (unit: sec, min)

1(2MIN) ↔ 2(1MIN) ↔ 4(30S)

Note that the total patrol time is two minutes, and the time allowed for each routine depends on the number of patrol routines that are configured. The values in parentheses indicate the time of each patrol routine (two minutes for one pattern, one minute each for two patterns, 30 seconds each for four patterns).

**PATROL**

NUMBER

4(30S)

PATROL1*

PLAY

PATROL2

---

PATROL3

---

PATROL4

---

RESET

RET TOP

If you want to change the number of patrol routines from a previous setting, first delete all of the currently store patrol routines. To delete everything, move the cursor to RESET, and press the CAM (SET) button.

3.Move the cursor to a PATROL number (PATROL 1 through 4), and then tilt the joystick left or right to select a patrol setting.

--- :Disables the selected patrol routine.

PLAY : Performs the selected patrol routine. (see this page)

LEARN : Select this option to teach the camera a series of movements (patrol routine). (An asterisk (*) to the right of a PATROL number indicates that it already has a patrol routine assigned to it.) (see this page)

DEL→PUSH SET : Press the CAM (SET) button to delete an existing patrol routine.

<When PLAY is selected>

(1)Press the system controller's F2 button to close the menu. The orientation of the camera moves to the stored start position, and the camera starts to playback the stored movement.

(2)When the playback is finished, manually pan, tilt, zoom and focus.

<When LEARN is selected>

(1)Press the system controller's F2 button to close the menu.

The start position is stored, and the camera's movements can be stored.

(2)Operate the camera to store the movements. "LEARNING (***S)" is displayed in the center of the screen when the movements are being stored. (unit: sec)

*"(***S)" indicates the amount of time that remains for storing movements.

(3)The setup menu is displayed and teaching stops. Storing movements stops when the remaining time reaches "0S".

Notes:

• Selecting LEARN to teach the camera a patrol routine causes the following parameters to be stored along with the camera movements.

(1)Parameters at the Beginning of the Routine

•PAN, TILT, ZOOM, and FOCUS positions

•IRIS level

•Shutter speed (SHUTTER)

•Gain (AGC) setting

•Electronic sensitivity enhancement (SENS UP) setting

•White balance (WHITE BAL) setting

•IMAGE HOLD

•AREA TITLE

•PRIVACY ZONE

•CAMERA ID

•PAN LIMIT

•ZOOM LIMIT

•TILT ANGLE

•BURST

•CLEANING

(2)During Camera Movement

•PAN, TILT, ZOOM, and FOCUS positions

•IRIS operation

•Preset positioning

•The auto-focus function does not work during patrol operations. The image goes out of focus when the camera zooms in from a wide angle (WIDE), this is caused by the zoom lens mechanism. The fuzziness in the image can be reduced by starting from a telephoto angle (TELE) when registering a zoom operation.

•In the patrol play mode, the camera movement may occasionally deviate from the entered routine when the routine includes a move to a preset position. If this happens, re-enter the routine of manual operations for patrol-learn.

•In the patrol play mode, black and white automatic switching does not work.

•In the patrol play mode, when the power of the system controller is turned on or off, the patrol play stops. In this case, press the PATROL PLAY button again. (If SELF RETURN is set to ON, the patrol play will start again after elapsing the setting return time.)

•Patrol movement covers a range from horizontal to directly below the camera. The digital flip function (page 37) does not operate.

-35-

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating Instructions English Version Important Safety Instructions Limitation of Liability Disclaimer of WarrantyStandard Accesories FeaturesPrecautions Operating Precautions Combining devices Self-diagnosing FunctionContents Ensuring Trouble-free Operation ConstructionInstallation Precautions About effects on image quality Important hints to help with the installationCommunication Parameters DIP Switch DIP Switch SettingsUnit Number DIP Switch DIP Switch Unit Number RS485 Communication Parameters DIP SwitchMounting the Camera Camera InstallationAssemble procedure PrecautionsMounting the Bracket Attach the brackets to the camera Installing the bracketsConnections Alarm In/Out RatingsAC Power Supply Connection Accessory Connector InformationConnect this to 24 V AC Class 2 Power Supply only How to Assemble the Cable with the Accessory ConnectorAUTO1 RS485 SetupEnables X ON/X OFF data flow control USEWhen using the WV-CU650 Using the Setup MenuDisplaying the Setup Menu Camera ID SettingsPosition Setting Position SET Scene Select SettingsPreset Position Settings Scene Select SettingsPreset ID Setting Preset ID To copy the preset ID of another position number Language SettingAdvanced Menu Settings ALC Camera SettingsUsing the Camera Setup Menu OFF AWC→PUSH SET Adjusting the Phase for Line-lock SynchronizationSynchronization Sync White Balance White BALDigital Noise Reduction DNR Resolution ResolutionBlack and White Mode BW Mode Auto Image Stabilizer Stabilizer Auto Focus AF ModeExample Zoom Limit Zoom LimitLight Control ALC/MANUAL PAN/TILT SettingsUsing the Pan/Tilt Setup Menu Position Number Selection PresetDeleting a Preset Position DEL Auto Focus AF ModeScene File Setting Scene File Preset Speed Setting Preset SpeedSort HomeApan SEQPAN Limit Configuring Auto PAN Detailed SettingsAuto PAN Key Setting Auto PAN KEY When Learn is selected Patrol Function Setting PatrolWhen Play is selected Image Hold Setting Image Hold Privacy Zone Setting Privacy ZoneArea Title Setting Area Title Digital Flip Setting Digital FlipProportional Pan/Tilt Setting PROPO. P/T Cleaning Settings Cleaning Tilt Angle Setting Tilt AngleMode Alarm SettingsUsing the Alarm Setup Menu Configuring Detailed Motion Detector Settings for ModePATROL1 1POSIAutopan 3POSI Alarm2POSI PATROL2ALL Special SettingsUsing the Special Setup Menu To delete a blemish compensation pattern Adjusting the Preset Positions RefreshReturning Camera Settings to Their Defaults Camera ResetUsing the Scene Select Setting Menu Scene Select SettingChanging the Password Password SettingsPassword Lock Settings Turning Password Lock On and OffOK Reset RET TOP Shortcuts Controller Operation SettingIris Close FIX TroubleshootingProblem 40-41 39-40 Periodically check the power cord Lens SpecificationsGeneral Pan and TiltMain Functions Page Panasonic System Solutions Company
Top Page Image Contents