Samsung SPD-1000 user manual English

Page 1

 

10X Day & Night PTZ Dome Camera SPD-1000 User’s Manual

SALES NETWORK

Thank you for purchasing a SAMSUNG CCD CAMERA.

SAMSUNG TECHWIN CO., LTD.

Before attempting to connect or operate this product,

145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea

please read these instructions carefully and save this manual for future use.

TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145

SAMSUNG OPTO-ELECTRONICS UK, LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS TEL : +44-1932-45-5308 FAX : +44-1932-45-5325

www.samsungtechwin.com

P/No. : Z6806-0836-01C

 

www.samsungcctv.com

ENGLISH

VAN 08.05

 

 

 

Image 1
Contents English Page Features Contents Persons is not recommended PrecautionsMain Body Port Block Rear panel BodySetting Baud Rate Based on DVR Model Camera Initial SettingsSetting Camera ID Switch Setting RS-485 TerminationSW2 #7 SW2 #8 On the PathSW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 100 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 150 Auxiliary Video Out Port Setting Termination ResistancePin Order Pin Name Purpose +12V Output PortProducts Sold Separately InstallationPreparation for Cable Following products are provided separatelyCamera holder Connect the Power Adapter’s plug to the Power Cable Connection Installation of SPD-1000Wall Mount STB-280PW Wall MountSTB-230PWTo complete installation, rotate Installing the SPD-1000 on a CeilingInstallation cover along the groove Installing the SPD-1000 Wall Mount Functional Description Installing the Dome Housing STH-1000PIOSD Menu Organization ExposureON/OFF Camera Setting PTZ Camera User Menu SettingsMain Menu Zoom TrackingWhite Balance WB ModeExposure Camera exposure can be controlledSsnr Samsung Super Noise Reduction Back LightSens-Up No noise reduction effectDay & Night Camera Setting OhterOthers Sequence Setting Menu Sequence SettingSelect the Preset number Set up the Zoom and Focus Clear SettingTime can be set up by the unit of 1-59 SEC and 1-59 MIN T SettingPan 350˚ Auto Run in Pan direction TraceName, adjust the position mark to SET using the joystick Chinese, numbers can be entered. When you finish inputtingArea Name To enter the area name. a maximum of 12 letters EnglishCamera Name Camera name is set up OSD SettingPreset Name Preset NameInput 1, Input 2 Alarm Input Mode/Priority/Method is set up Alarm SettingPreset/Swing/Group/Tour/Trace/A.PAN ON/OFF Alarm is enabled in on modeInitialize Status of dome camera setting is displayedStatus Initialization MenuProduct Structure Installation 2 Mini PTZ Dome Camera Control SpecificationsAuto/Manual1/50~1/120000 Declaration of Conformity