Functional Description
Tilt Limit : Moving range in the tilt direction can be limited.
Main Menu | P/T Setting |
|
Camera Setting | Pan Limit |
|
Sequence Setting | Tilt Limit |
|
P/T Setting | Area Setting |
|
OSD Setting | Area Masking |
|
Alarm Setting | Prop. P/T | ON |
Initialize | Digital Flip | ON |
Status | Jog Speed | Manual |
Position : Moving range can be set up. Set the position from the top direction using the joystick and the Execution key. The stop position may change due to initialization by such operation as power resumption depending on position setting. This does not mean it is out of order.
On/Off : The application of limitation will be determined. Default setting is Off.
Area Setting : Areas can be indicated. Areas can be designated up to 4.
Main Menu | P/T Setting |
|
Camera Setting | Pan Limit |
|
Sequence Setting | Tilt Limit |
|
P/T Setting | Area Setting |
|
OSD Setting | Area Masking |
|
Alarm Setting | Prop. P/T | ON |
Initialize | Digital Flip | ON |
Status | Jog Speed | Manual |
Area Name | : Area name can be set up. Use the joystick and the Execution key |
| to enter the area name. A maximum of 12 letters (English, |
| Chinese, numbers) can be entered. When you finish inputting the |
| name, adjust the position mark to ”SET” using the joystick and |
| press the Execution key. This is the end of Area Name setting. |
Area Position | : Area range can be designated. Use the joystick and the Execution |
| key to determine the position from the left. If the area range is |
| overlapped, the smaller area number will indicate the overlapping part. |
On/Off : It can be determined whether or not to activate the area mark. The activation becomes effective as soon as the position moves from the current area to other areas. Set up the OSD Setting as ON. If it is in OFF mode, this function does not work. Default setting is OFF.
Area Masking : If you want to exclude some areas for surveillance, they can be turned into black. You can mask 4 parts of one screen.
Main Menu | P/T Setting |
|
Camera Setting | Pan Limit |
|
Sequence Setting | Tilt Limit |
|
P/T Setting | Area Setting |
|
OSD Setting | Area Masking |
|
Alarm Setting | Prop. P/T | ON |
Initialize | Digital Flip | ON |
Status | Jog Speed | Manual |
Position : Use the joystick and the Execution key to determine the position for screen operation from the left.
On/Off : Operation of screen area masking can be determined. Default setting is OFF.
Prop. P/T : Pan and Tilt speeds can be changed depending on zoom magnification. Tele will slow down the speed of Pan/Tilt and Wide will increase the Pan/Tilt speed. It will take about 20 seconds for 1 cycle in Tele mode and about 3 seconds in the Wide mode. Default setting is ON.
Main Menu | P/T Setting |
|
Camera Setting | Pan Limit |
|
Sequence Setting | Tilt Limit |
|
P/T Setting | Area Setting |
|
OSD Setting | Area Masking |
|
Alarm Setting | Prop. P/T | ON |
Initialize | Digital Flip | ON |
Status | Jog Speed | Manual |
48 | 49 |