Samsung SPD-1000 user manual On/Off

Functional Description

P1	P2	P3					P4			Defaults
	Preset	Setting	Edit	Execute Clear			Status
		Pan Swing			Setting		Execute	Clear
	Swign SEQ	Tilt Swing			Setting		Execute	Clear
		P/T Swing			Setting		Execute	Clear
		Group1			Setting		Execute	Clear
		Group2			Setting		Execute	Clear
	Group SEQ	Group3			Setting		Execute	Clear
		Group4			Setting		Execute	Clear
		Group5			Setting		Execute	Clear
		Group6			Setting		Execute	Clear
Sequence	Tour SEQ	Setting Execute		Clear
		Trace1			Replay		Memorize
Setting
	PTZ Trace	Trace2			Replay		Memorize
		Trace3			Replay		Memorize
		Trace4			Replay		Memorize
					Off					OFF
					Preset	Preset No
					Swing	Swing Mode Pan/Tilt/P&T
		Mode			Group	Group No
	Auto Run				Tour
					Trace	Trace1~Trace4
					A.Pan		Auto Pan Speed		20-50	32
							Tilt Angle		10-45	25
		Time			1-59(SEC), 1-59(MIN)					30 sec
	Power On	On/Off								OFF
	Resume
	Pan Limit	Position	ON/OFF
	Tilt Limit	Position	ON/OFF
		Area1
					Area Name
P/T		Area2
Setting	Area Setting				Position
		Area3			ON/OFF
		Area4
	Area Masking	Mask1			Position
		Mask2			ON/OFF

					Defaults
		Mask3
P/T		Mask4
	Prop. P/T	ON / OFF			ON
Setting
	Digital Flip	ON / OFF			ON
	Jog Speed	Manual (10,20,30,40,50,60)			MANUAL
	Camera ID	ON / OFF		Position	ON
	Camera Name	ON / OFF	Edit
				ON/OFF
	Preset Number	ON / OFF			ON
OSD	Preset Name	ON / OFF	Edit
	Sequence Status	ON / OFF			ON
Setting
	Area Name	ON / OFF			OFF
	PTZ Position	ON / OFF			OFF
	Language	English,Chinese,Francais,			English
		Deutsch,Espanol,Italiano
	Output Clear
	Input 1	NC/NO/OFF
		L/H(Priority)
		Preset/Swing/Group/Tour
	Input 2
Alarm		/Trace/A.PAN/OFF
Setting
		1~2, MD
	Output	1-59 (Sec)			01(Min)
		1-59 (Min)
		1-59 (Hour)
	Enable	ON/OFF			OFF
	MD Dwell Time	ON/OFF		1-59(Sec) / 1-59(Min)	30sec
	Power On Reset	Cancel	Execute
	Initial Position	Position	ON/OFF
Initialize	Factory Default Set	Cancel	Execute
	Camera Default Set	Cancel	Execute
	Auto Refresh	OFF, 1~7Days			OFF
Status

Notes

• Preset settings are only possible within the OSD menu or by using the controller.

32 33