Samsung SPD-1000 user manual Clear, Setting

Functional Description

6.If you select the Scene Adj. item, such items as Shutter, AGC, SSNR, Sens-Up, White Balance can be set up differently in every Preset item.

Notes

Scene Adj. [001]

Shutter	---
AGC	Normal
SSNR	LOW
Sens-Up	AUTO
White Balance	ATW(OUT)

Group SEQ: Sequence surveillance can be executed and set up and data can be deleted. Up to 6 groups can be registered.

Sequence Setting	Group SEQ
Preset	Group	1
Swing SEQ	Group	2
Group SEQ	Group	3
Tour SEQ	Group	4
PTZ Trace	Group	5
Auto Run	Group	6

•In the White Balance setting of the individual Preset Scene Adj., the AWC selection is not available.

Swing SEQ : Swing surveillance can be executed and set up and the data can be deleted.

Sequence Setting	Swing SEQ
Preset	Pan Swing
Swing SEQ	Tilt Swing
Group SEQ	P&T Swing
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF

Pan Swing : Swing surveillance for the Pan direction is executed and set up. Data is deleted.

Tilt Swing : Swing surveillance for the Tilt direction is executed and set up. Data is deleted.

P&T Swing : Swing surveillance both for the Pan and the Tilt directions are executed and set up simultaneously. Data is deleted.

*Setting : The Preset Position for Swing function is selected with the joystick and confirmed with the Execution key. SPD is the moving speed (01-64step). DWL is the stop time (00-120sec). Press the Execution key in the location with selection mark to finish the setting process.

*Execute : Swing surveillance is executed. Stop key designates this function.

*Clear : Data in the Swing function is deleted.

Power On Resume OFF

Setting : Preset position for swing is selected with the joystick and confirmed with the Execution key. SPD is the moving speed (01~64 step). DWL is the stop time (00~120sec). Press the Execution key in the location with selection mark to finish the setting process.

Execute : Swing surveillance can be executed. Stop key will stop this function. Clear : Swing data can be deleted.

Tour : Group surveillance can be executed and set up and data can be deleted.

Sequence Setting		Tour SEQ
Preset		Setting
Swing SEQ		Execute
Group SEQ		Clear
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Setting	: The registered Group Sequence is selected with the joystick and
	confirmed with the Execution key. If the selected number is not
	registered, it cannot be input. Press the Execution key in the location
	with selection mark to finish the setting process.
Execute : Group surveillance is executed.
Clear	: Group surveillance data are deleted.

44 45