Axis Communications Q1615 Convert Event Types to Action Rules, Setting Up an Action Rule, System

Page 41

AXIS Q1615 Network Camera

Events

-Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.

•System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence – Trigger the rule periodically. See Recurrences on page 44. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules on page 43.

Available actions include:

•Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).

•Output Port – Activate an I/O port to control an external device.

•Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 27.

•Play Audio Clip – See Audio Clips on page 29.

•PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour on page 33.

•Record Video – Record video to a selected storage.

•Send Images – Send images to a recipient.

•Send Notifications – Send a notification message to a recipient.

•Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured under System Options > Network > SNMP.

•Send Video Clip – Send a video clip to a recipient.

•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.

•WDR Mode – The WDR Mode can be turned on or off when the action rule is triggered.

Convert Event Types to Action Rules

If the Axis product is upgraded to firmware version 5.40 or later, it is recommended to convert Event Types to Action Rules. The legacy user Event Types in the camera will continue to work but will not be visible in the user interface of the camera. The Event Types need to be converted to Action rules to become visible in the user interface.

To convert Event Types to Action Rules go to Events > Action Rules and click Convert.

NOTICE

This is not recommended when using a VMS based on the old Event Management System.

Setting Up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Axis Q1615 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1615 Network Camera Table of ContentsConnectors Performance Considerations TroubleshootingHardware Overview Connectors and ButtonsFor technical specifications, see Connector Network ConnectorPower Connector Audio ConnectorStatus LED Behavior for Focus Assistant LED IndicatorsFunction Button Color IndicationReplacing the lens Buzzer Signal for Focus AssistantBuzzer LensAxis Q1615 Network Camera Access from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsAxis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsAdjust Focus Setting Up the ProductBasic Setup Focus Assistant Video Stream Video and AudioPixel Counter Image264 Click Save to apply the new settingsStream Profiles Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings View AreaImage Correction Image AppearanceWhite Balance Wide Dynamic RangeSet Shutter to Exposure SettingsShutter & Gain View Area Overlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageFocus Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesAudio Modes Audio SettingsAudio Input BasicAudio Output Audio ClipsAxis Q1615 Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsCamera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesRecommended values 15% 60-90% 75-95%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1615 Network Camera Events Input SignalDetectors HardwareConvert Event Types to Action Rules Setting Up an Action RuleSystem TimeGo to Events Action Rules and click Add RecipientsRecipient Use with actionSchedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourPorts & Devices StorageSD Card Network ShareLED Indicators MaintenanceCOM Port Port StatusSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q1615 Network Camera Emergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Specification Network Security Function/group Specifications Audio Audio streamingAudio input Audio outputPower Function/group SpecificationsConnectors WeightConnector ConnectorsFunction Pin Specifications Setup exampleFunction Pin RS485/422 ConnectorAudio Input Audio Output Performance Considerations M2.12
Top Page Image Contents