Axis Communications Q1615 Maintenance, COM Port, LED Indicators, Port Status, Accelerometer

Page 56

AXIS Q1615 Network Camera

System Options

The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.

COM Port

The Axis product has one RS-485/RS-422 serial port. The port supports the following modes:

•Generic HTTP allows the Axis product to receive data and send commands via HTTP.

•Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See for more information. Drivers can be downloaded from www.axis.com

•Generic TCP/IPallows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisy chain clients to communicate with the Axis product.

Select the desired Port Type from the drop-down list. For more information on Serial Port Settings and Daisy Chain Port Settings

see the online help .

LED Indicators

LED

Color

Indication

 

 

 

Network

Green

Steady for connection to a 100 Mbit/s network. Flashes for network activity.

 

 

 

 

Amber

Steady for connection to a 10 Mbit/s network. Flashes for network activity.

 

 

 

 

Unlit

No network connection.

 

 

 

Status

Green

Steady green for normal operation.

 

 

 

 

Amber

Steady during startup and when restoring settings.

 

 

 

 

Red

Slow flash for failed upgrade.

 

 

 

Power

Green

Normal operation.

 

 

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

 

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

•The Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Accelerometer

The leveling assistant that helps to level the camera is enabled by default. To disable it, de-select the Enable leveling assistant option from System Options > Ports & Devices > Accelerometer and click Save. To enable leveling assistant, click Reset.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

56

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Axis Q1615 Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1615 Network CameraTroubleshooting Connectors Performance ConsiderationsHardware Overview Connectors and ButtonsFor technical specifications, see Network Connector ConnectorPower Connector Audio ConnectorLED Indicators Status LED Behavior for Focus AssistantFunction Button Color IndicationBuzzer Signal for Focus Assistant Replacing the lensBuzzer LensAxis Q1615 Network Camera Accessing the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Configure Capture ModeLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewPTZ Controls AMC Audio ControlsAxis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingAdjust Focus Setting Up the ProductBasic Setup Focus Assistant Video and Audio Video StreamPixel Counter Image264 Click Save to apply the new settingsStream Profiles Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings View AreaImage Appearance Image CorrectionWhite Balance Wide Dynamic RangeSet Shutter to Exposure SettingsShutter & Gain View Area Overlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImagePrivacy Mask FocusUse Overlay Text in an Action Rule Go to Events Action RulesAudio Settings Audio ModesAudio Input BasicAudio Clips Audio OutputAxis Q1615 Network Camera Live View Config Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourOperator Same as administrator but with lower priority AdvancedControl Queue ControlsDetectors Camera TamperingMotion Detection Shock DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Audio DetectionRecommended values 15% 60-90% 75-95%Install Application Go to Setup ApplicationsApplications Application LicensesAxis Q1615 Network Camera Input Signal EventsDetectors HardwareSetting Up an Action Rule Convert Event Types to Action RulesSystem TimeRecipients Go to Events Action Rules and click AddRecipient Use with actionSetting Up an Email Recipient SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecurrences Go to Events Recurrences and click AddRecordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates To install a self-signed certificate Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage Ports & DevicesSD Card Network ShareMaintenance LED IndicatorsCOM Port Port StatusSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadAxis Q1615 Network Camera Troubleshooting Emergency Recovery ProcedureChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Audio Audio streaming Specification Network SecurityAudio input Audio outputFunction/group Specifications PowerConnectors WeightConnectors ConnectorFunction Pin Specifications Setup exampleFunction Pin RS485/422 ConnectorAudio Input Audio Output Performance Considerations M2.12
Top Page Image Contents