Axis Communications Q1615 user manual Buzzer Signal for Focus Assistant, Replacing the lens, Lens

Page 9

AXIS Q1615 Network Camera

Hardware Overview

Buzzer Signal for Focus Assistant

Buzzer

Fast interval

Medium interval

Slow interval

Lens

Optimally adjusted

Less optimally adjusted

Poorly adjusted

Status LED Behavior and Buzzer Signal for Levelling Assistant

For information on the Function button used for levelling the camera, see Connectors and Buttons.

Color	Buzzer	Camera position

Fixed green	Continuous beep	Level

Flashing green	Fast interval	Almost level

Flashing orange	Medium interval	Not level

Flashing red	Slow interval	Far from level

Replacing the lens

It is possible to use optional lenses for the Axis product.

To replace the lens:

1.Disconnect the iris cable.

2.Unscrew the standard lens.

3.Attach and screw on the new lens. To change the iris configuration:

1.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

2.Click Edit.

3.Select the installed iris lens from the drop-down list and click OK.

To change the iris configuration for P-iris lenses not listed in the drop-down list:

1.Download the iris configuration file from www.axis.com

2.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

3.In Iris configuration : Click Edit.

4.Go to the Upload tab.

5.Click Browse and select the configuration file.

6.Click Upload. The installed iris lens should now be included in the Iris Selection drop-down list.

7.Select the installed iris lens from the drop-down list and click OK.

9

Image 9

Contents Axis Q1615 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1615 Network Camera Table of ContentsConnectors Performance Considerations TroubleshootingConnectors and Buttons For technical specifications, seeHardware Overview Connector Network ConnectorPower Connector Audio ConnectorStatus LED Behavior for Focus Assistant LED IndicatorsFunction Button Color IndicationReplacing the lens Buzzer Signal for Focus AssistantBuzzer LensAxis Q1615 Network Camera Access from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsHow to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Basic SetupAdjust Focus Focus Assistant Video Stream Video and AudioPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings View AreaImage Correction Image AppearanceWhite Balance Wide Dynamic RangeExposure Settings Shutter & GainSet Shutter to View Area Overlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageFocus Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesAudio Modes Audio SettingsAudio Input BasicAudio Output Audio ClipsAxis Q1615 Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsCamera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesRecommended values 15% 60-90% 75-95%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1615 Network Camera Events Input SignalDetectors HardwareConvert Event Types to Action Rules Setting Up an Action RuleSystem TimeGo to Events Action Rules and click Add RecipientsRecipient Use with actionSchedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourPorts & Devices StorageSD Card Network ShareLED Indicators MaintenanceCOM Port Port StatusSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q1615 Network Camera Emergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Specification Network Security Function/group Specifications Audio Audio streamingAudio input Audio outputPower Function/group SpecificationsConnectors WeightConnector ConnectorsFunction Pin Specifications Setup exampleRS485/422 Connector Audio Input Audio OutputFunction Pin Performance Considerations M2.12