Axis Communications Q1615 Recording List, Continuous Recording, Go to Recordings List

Page 45

AXIS Q1615 Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 45.

•To set up action rules, see page 41.

•To access recordings, see Recording List on page 45.

•To configure camera controlled storage, see Storage on page 55.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage on page 55 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Axis Q1615 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1615 Network Camera Table of ContentsConnectors Performance Considerations TroubleshootingConnectors and Buttons For technical specifications, seeHardware Overview Connector Network ConnectorPower Connector Audio ConnectorStatus LED Behavior for Focus Assistant LED IndicatorsFunction Button Color IndicationReplacing the lens Buzzer Signal for Focus AssistantBuzzer LensAxis Q1615 Network Camera Access from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsHow to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Basic SetupAdjust Focus Focus Assistant Video Stream Video and AudioPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings View AreaImage Correction Image AppearanceWhite Balance Wide Dynamic RangeExposure Settings Shutter & GainSet Shutter to View Area Overlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageFocus Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesAudio Modes Audio SettingsAudio Input BasicAudio Output Audio ClipsAxis Q1615 Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsCamera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesRecommended values 15% 60-90% 75-95%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1615 Network Camera Events Input SignalDetectors HardwareConvert Event Types to Action Rules Setting Up an Action RuleSystem TimeGo to Events Action Rules and click Add RecipientsRecipient Use with actionSchedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourPorts & Devices StorageSD Card Network ShareLED Indicators MaintenanceCOM Port Port StatusSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q1615 Network Camera Emergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Specification Network Security Function/group Specifications Audio Audio streamingAudio input Audio outputPower Function/group SpecificationsConnectors WeightConnector ConnectorsFunction Pin Specifications Setup exampleRS485/422 Connector Audio Input Audio OutputFunction Pin Performance Considerations M2.12
Top Page Image Contents