AXIS Q1615 Network Camera
Events
The following example describes how to set up an action rule to record video to a network share if there is movement in the camera’s field of view.
Set up motion detection and add a network share:
1.Go to Detectors > Motion Detection and configure a motion detection window. See page 36
2.Go to System Options > Storage and set up the network share. See page 55.
Set up the action rule:
1.Go to Events > Action Rules and click Add.
2.Select Enable rule and enter a descriptive name for the rule.
3.Select Detectors from the Trigger
4.Select Motion Detection from the
5.Optionally, select a Schedule and Additional conditions. See below.
6.Under Actions, select Record Video from the Type
7.Select a Stream profile and configure the Duration settings as described below.
8.Select Network Share from the Storage
To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.
The recording Duration of some actions can be set to include time immediately before and after the event. Select
For more information, see the online help .
Recipients
Recipients receive media files and notification messages. The following recipients are available:
Recipient
Email1
FTP
HTTP
HTTPS
Use with action
Send Images
Send Notification
Send Video Clip
Send Images Send Video Clip
Send Images
Send Notification
Send Video Clip
Send Images
Send Notification
Send Video Clip
42