Axis Communications Q1615 Date & Time, Audio Support, To install a self-signed certificate

Page 49

AXIS Q1615 Network Camera

System Options

To install a self-signed certificate:

1.Go to Setup > System Options > Security > Certificates .

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to Setup > System Options > Security > Certificates .

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates . If required, additional CA certificates can be installed:

1.Go to Setup > System Options > Security > Certificates .

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings on page 28.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration on page 52.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 51.

•Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Axis Q1615 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1615 Network Camera Table of ContentsConnectors Performance Considerations TroubleshootingFor technical specifications, see Connectors and ButtonsHardware Overview Connector Network ConnectorPower Connector Audio ConnectorStatus LED Behavior for Focus Assistant LED IndicatorsFunction Button Color IndicationReplacing the lens Buzzer Signal for Focus AssistantBuzzer LensAxis Q1615 Network Camera Access from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsMedia Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductAdjust Focus Focus Assistant Video Stream Video and AudioPixel Counter ImageStream Profiles Click Save to apply the new settings264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings View AreaImage Correction Image AppearanceWhite Balance Wide Dynamic RangeShutter & Gain Exposure SettingsSet Shutter to View Area Overlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageFocus Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesAudio Modes Audio SettingsAudio Input BasicAudio Output Audio ClipsAxis Q1615 Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsCamera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesRecommended values 15% 60-90% 75-95%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1615 Network Camera Events Input SignalDetectors HardwareConvert Event Types to Action Rules Setting Up an Action RuleSystem TimeGo to Events Action Rules and click Add RecipientsRecipient Use with actionSchedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourPorts & Devices StorageSD Card Network ShareLED Indicators MaintenanceCOM Port Port StatusSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q1615 Network Camera Emergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Specification Network Security Function/group Specifications Audio Audio streamingAudio input Audio outputPower Function/group SpecificationsConnectors WeightConnector ConnectorsFunction Pin Specifications Setup exampleAudio Input Audio Output RS485/422 ConnectorFunction Pin Performance Considerations M2.12
Top Page Image Contents