Axis Communications Q1615-E user manual Status LED Behavior for Focus Assistant, Replace the Lens

Page 10

AXIS Q1615-E Network Camera

Hardware Overview

	LED	Color	Indication

	Housing	Green	Normal operation.
	(fan and heater)
	(fan and heater)	Flashing	Single flash:	Heater error
		Flashing	Single flash:	Heater error
		green	Double flash:	Fan error
			Triple flash:	General error
			Alarm events will be triggered through the camera’s input port.
			Contact your Axis reseller for information about spare parts and troubleshooting.

Note

This status LED referred to in the table above is located in the housing.

Status LED Behavior for Focus Assistant

Color

Green

Amber

Red

Indication

Focus Assistant is enabled

The lens is optimally adjusted

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is less optimally adjusted.

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is poorly adjusted.

Buzzer Signal for Focus Assistant

Buzzer

Fast interval

Medium interval

Slow interval

Lens

Optimally adjusted

Less optimally adjusted

Poorly adjusted

Status LED Behavior and Buzzer Signal for Levelling Assistant

For information on the Function button used for levelling the camera, see Connectors and Buttons.

Color	Buzzer	Camera position

Fixed green	Continuous beep	Level

Flashing green	Fast interval	Almost level

Flashing orange	Medium interval	Not level

Flashing red	Slow interval	Far from level

Replace the Lens

It is possible to use optional lenses for the Axis product.

To replace the lens:

1. Disconnect the iris cable.

10

Image 10

Contents Axis Q1615-E Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1615-E Network CameraConnectors Performance Considerations Hardware Overview Axis Q1615-E Network Camera Connectors and Buttons Function Button LED IndicatorsControl Button Function button has multiple functionsStatus LED Behavior for Focus Assistant Buzzer Signal for Focus AssistantReplace the Lens Axis Q1615-E Network Camera Access from the Internet Access the ProductAccess from a Browser Set the Root PasswordLive View Set Power Line FrequencyConfigure Capture Mode Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewPTZ Controls AMC Audio ControlsAxis Q1615-E Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingBasic Setup Set Up the ProductAdjust Focus Focus Assistant Pixel Counter Video and AudioVideo Stream ImageStream Profiles Click Save to apply the new settings264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Image Correction View AreaImage Appearance White BalanceSet Shutter to Exposure SettingsShutter & Gain Low light priority slider toward low noise ExampleView Area Go to Video & Audio Video Stream and select the Image tab OverlayOverlay Image Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Go to Events Action RulesFocus Audio SettingsPrivacy Mask Audio ModesAudio Input Audio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourControl Queue Operator Same as administrator but with lower priorityAdvanced ControlsAxis Q1615-E Network Camera Motion Detection DetectorsCamera Tampering Shock DetectionSet Up Motion Detection Windows Motion Detection ParametersRecommended values Default valuesAudio Detection 15% 60-90% 75-95%Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q1615-E Network Camera Convert Event Types to Action Rules Set Up Action RulesEvents Go to Events Action Rules and click AddCreate Schedules Set Up Email RecipientsAdd Recipients Go to Events Recipients and click AddSet Up Recurrences Go to Events Recurrences and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Click Install certificate and upload the certificate To install a self-signed certificateGo to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 SD Card StorageBonjour Network ShareMaintenance Ports & DevicesSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Audio output Function/group Specifications Audio Audio streamingAudio input Network SecurityConnectors Function/group SpecificationsPower WeightConnector ConnectorsWarranty Function Pin SpecificationsOutput RS485/422 ConnectorPerformance Considerations Function PinAxis Q1615-E Network Camera M2.8