Axis Communications Q1615-E user manual Ports & Devices, Maintenance

Page 58

AXIS Q1615-E Network Camera

System Options

Ports & Devices

I/O Ports

The Axis product provides two configurable input and output ports for connection of external devices. For information about how to connect external devices, see Connectors on page 68.

The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.

COM Port

The Axis product has one RS-485/RS-422 serial port. The port supports the following modes:

•Generic HTTP allows the Axis product to receive data and send commands via HTTP.

•Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See for more information. Drivers can be downloaded from www.axis.com

•Generic TCP/IPallows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisy chain clients to communicate with the Axis product.

Select the desired Port Type from the drop-down list. For more information on Serial Port Settings and Daisy Chain Port Settings

see the online help .

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Accelerometer

The leveling assistant that helps to level the camera is enabled by default. To disable it, de-select the Enable leveling assistant option from System Options > Ports & Devices > Accelerometer and click Save. To refresh the page and view the saved setting, click Reset.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Note

A restart clears all entries in the Server Report.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

•the focus position

58

Image 58

Contents Axis Q1615-E Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1615-E Network CameraConnectors Performance Considerations Hardware Overview Axis Q1615-E Network Camera Connectors and Buttons Function Button LED IndicatorsControl Button Function button has multiple functionsStatus LED Behavior for Focus Assistant Buzzer Signal for Focus AssistantReplace the Lens Axis Q1615-E Network Camera Access from the Internet Access the ProductAccess from a Browser Set the Root PasswordLive View Set Power Line FrequencyConfigure Capture Mode Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewPTZ Controls AMC Audio ControlsAxis Q1615-E Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingBasic Setup Set Up the ProductAdjust Focus Focus Assistant Pixel Counter Video and AudioVideo Stream ImageStream Profiles Click Save to apply the new settings264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Image Correction View AreaImage Appearance White BalanceSet Shutter to Exposure SettingsShutter & Gain Low light priority slider toward low noise ExampleView Area Go to Video & Audio Video Stream and select the Image tab OverlayOverlay Image Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Go to Events Action RulesFocus Audio SettingsPrivacy Mask Audio ModesAudio Input Audio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourControl Queue Operator Same as administrator but with lower priorityAdvanced ControlsAxis Q1615-E Network Camera Motion Detection DetectorsCamera Tampering Shock DetectionSet Up Motion Detection Windows Motion Detection ParametersRecommended values Default valuesAudio Detection 15% 60-90% 75-95%Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q1615-E Network Camera Convert Event Types to Action Rules Set Up Action RulesEvents Go to Events Action Rules and click AddCreate Schedules Set Up Email RecipientsAdd Recipients Go to Events Recipients and click AddSet Up Recurrences Go to Events Recurrences and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Click Install certificate and upload the certificate To install a self-signed certificateGo to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 SD Card StorageBonjour Network ShareMaintenance Ports & DevicesSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Audio output Function/group Specifications Audio Audio streamingAudio input Network SecurityConnectors Function/group SpecificationsPower WeightConnector ConnectorsWarranty Function Pin SpecificationsOutput RS485/422 ConnectorPerformance Considerations Function PinAxis Q1615-E Network Camera M2.8