Axis Communications Q1615-E LED Indicators, Control Button, Function Button, Color Indication

Page 9

AXIS Q1615-E Network Camera

Hardware Overview

Note

For SD card recommendations see www.axis.com

Control Button

The control button is used for:

•Resetting the product to factory default settings. See page 60.

•Connecting to an AXIS Video Hosting System service. See page 53. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 53. To connect, press and hold the button for about 3 seconds.

Function Button

The function button has multiple functions:

•Levelling assistant – This function helps to ensure the camera is level. Press the button for about 3 seconds to start the levelling assistant and press again to stop the leveling assistant. The status LED (see page 10) and buzzer signal (see page 10) assist levelling of the camera. The camera is level when the buzzer beeps continuously.

•Focus assistant – This function is used for enabling the Focus Assistant. To enable the focus assistant, press and very quickly release the button. Press again to stop the focus assistant. For more information, see the Installation Guide.

LED Indicators

LED	Color	Indication

Network	Green	Steady for connection to a 100 Mbit/s network. Flashes for network activity.

	Amber	Steady for connection to a 10 Mbit/s network. Flashes for network activity.

	Unlit	No network connection.

Status	Green	Steady green for normal operation.

	Amber	Steady during startup and when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

•The Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

9

Image 9

Contents Axis Q1615-E Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1615-E Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Axis Q1615-E Network Camera Connectors and Buttons Control Button LED IndicatorsFunction Button Function button has multiple functionsBuzzer Signal for Focus Assistant Status LED Behavior for Focus AssistantReplace the Lens Axis Q1615-E Network Camera Access from a Browser Access the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsAxis Q1615-E Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsSet Up the Product Basic SetupAdjust Focus Focus Assistant Video Stream Video and AudioPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Image Appearance View AreaImage Correction White BalanceShutter & Gain Exposure SettingsSet Shutter to Low light priority slider toward low noise ExampleView Area Overlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask Audio SettingsFocus Audio ModesAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsAxis Q1615-E Network Camera Camera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesRecommended values 15% 60-90% 75-95%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1615-E Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddAdd Recipients Set Up Email RecipientsCreate Schedules Go to Events Recipients and click AddGo to Events Recurrences and click Add Set Up RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 Bonjour StorageSD Card Network SharePorts & Devices MaintenanceSupport Overview SupportSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Audio input Function/group Specifications Audio Audio streamingAudio output Network SecurityPower Function/group SpecificationsConnectors WeightWarranty ConnectorsConnector Function Pin SpecificationsPerformance Considerations RS485/422 ConnectorOutput Function PinAxis Q1615-E Network Camera M2.8