Axis Communications user manual Axis Q1615-E Network Camera

Page 11

AXIS Q1615-E Network Camera

Hardware Overview

2.Unscrew the standard lens.

3.Attach and screw on the new lens. To change the iris configuration:

1.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

2.Click Edit.

3.Select the installed iris lens from the drop-down list and click OK.

To change the iris configuration for P-iris lenses not listed in the drop-down list:

1.Download the iris configuration file from www.axis.com

2.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

3.In Iris configuration : Click Edit.

4.Go to the Upload tab.

5.Click Browse and select the configuration file.

6.Click Upload. The installed iris lens should now be included in the Iris Selection drop-down list.

7.Select the installed iris lens from the drop-down list and click OK.

Note

•If you select a DC iris configuration file for a P-iris lens, an error message will appear below the iris configuration type in the Camera Settings page. For custom DC Iris lenses, select Generic DC Iris option.

•There is no need to restart the product after changing the lens. However, the product must be restarted if you are interchanging between a P-iris, DC-Iris or fixed/manual iris lens. In order to set the focus and position the lens, the product must be connected to the network.

11

Image 11

Contents Axis Q1615-E Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q1615-E Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Axis Q1615-E Network Camera Connectors and Buttons Function button has multiple functions LED IndicatorsControl Button Function ButtonReplace the Lens Buzzer Signal for Focus AssistantStatus LED Behavior for Focus Assistant Axis Q1615-E Network Camera Set the Root Password Access the ProductAccess from a Browser Access from the InternetControls on the Live View Set Power Line FrequencyConfigure Capture Mode Live ViewTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAMC Audio Controls PTZ ControlsAxis Q1615-E Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsAdjust Focus Set Up the ProductBasic Setup Focus Assistant Image Video and AudioVideo Stream Pixel Counter264 Click Save to apply the new settingsStream Profiles Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode White Balance View AreaImage Appearance Image CorrectionLow light priority slider toward low noise Example Exposure SettingsShutter & Gain Set Shutter toView Area Go to Video & Audio Overlay Image OverlayOverlay Image Go to Video & Audio Video Stream and select the Image tabGo to Events Action Rules Use Overlay Text in an Action RuleAudio Modes Audio SettingsPrivacy Mask FocusAudio Input Audio Output Audio ClipsBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsGuard Tour Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls Operator Same as administrator but with lower priorityAdvanced Control QueueAxis Q1615-E Network Camera Shock Detection DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection Windows15% 60-90% 75-95% Default valuesAudio Detection Recommended valuesApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q1615-E Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesGo to Events Recipients and click Add Set Up Email RecipientsAdd Recipients Create SchedulesGo to Events Recurrences and click Add Set Up RecurrencesGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Network Share StorageBonjour SD CardPorts & Devices MaintenanceLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserSetup Video & Audio Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Network Security Function/group Specifications Audio Audio streamingAudio input Audio outputWeight Function/group SpecificationsPower ConnectorsFunction Pin Specifications ConnectorsWarranty ConnectorFunction Pin RS485/422 ConnectorPerformance Considerations OutputAxis Q1615-E Network Camera M2.8